Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Nanoskin DA pad issues
^ Very helpful - thank you all!
-
Junior Member
Re: Nanoskin DA pad issues
You didnt happen to use any tar remover on the car after the wash did you. I know for a fact tar removers melt the material nanoskin is made of. To me it looks like you hit a spot of tar remover, heat would habe caused more streaking like appearance and not happened as suddenly as yours seems to have happened.
-
Re: Nanoskin DA pad issues
Not after... I did before....but then I rinsed, foam cannoned, 2b wash, dry, and then Iron-x.
I hope that stuff was off by then! ha
-
Re: Nanoskin DA pad issues
Like others have posted, I have used mine many times with no problems.
Just a guess but lubrication and speed must be the problem. I mainly use Nano Skin lubricant but have tried others with no problem. Just a thought but pressure might also come into play. I let the weight of the machine do the work.
I haven't used any of my clay bars since I purchased the Nano Skin pads. I think they are the way to go. Saves a lot to time and effort compared to clay.
Good luck and hope you work it out.
-
Super Member
Re: Nanoskin DA pad issues
I melted my Nanoskin fine sponge after using IronX that was incompletely removed. My sponge looked very much like your disc but not as bad since I noticed it grabbing right away.
Perfection is attained by slow degrees; it requires the hand of time. (Voltaire)
2013 TESLA MODEL S | Gyeon Syncro | Gyeon Cancoat
-
Re: Nanoskin DA pad issues
Well that's interesting... I guess some iron x could have leaked out of the grill area onto the front bumper....hmmm!
Thanks so much for all the input
-
Junior Member
Re: Nanoskin DA pad issues
Hmmmm Iron-x by itself should not melt the Nanoskin. However Trix by Carpro (iron-x and tar remover together) will.
-
Super Member
Re: Nanoskin DA pad issues
Didn't use iron x at the time when I was using my sponge. Either the IronX or I can shake my hand pretty fast!
Perfection is attained by slow degrees; it requires the hand of time. (Voltaire)
2013 TESLA MODEL S | Gyeon Syncro | Gyeon Cancoat
-
Super Member
Re: Nanoskin DA pad issues
At most I would use a PC or equivalent running no more than 2 to 3. I do nano skin by hand.
-
Super Member
Re: Nanoskin DA pad issues
Sorry... Meant to say that I didn't use TarX at the time...
Perfection is attained by slow degrees; it requires the hand of time. (Voltaire)
2013 TESLA MODEL S | Gyeon Syncro | Gyeon Cancoat
Similar Threads
-
By Toolhead in forum Auto Detailing 101
Replies: 19
Last Post: 09-04-2018, 06:09 PM
-
By eyost in forum Auto Detailing 101
Replies: 10
Last Post: 02-21-2018, 06:36 PM
-
By 808_detail_nut in forum Auto Detailing 101
Replies: 4
Last Post: 10-16-2015, 10:00 AM
-
By Lustrous Detail in forum Hot topics & Frequently Asked Questions
Replies: 7
Last Post: 05-15-2015, 05:49 PM
-
By DiPaoro in forum Auto Detailing 101
Replies: 7
Last Post: 12-04-2012, 06:35 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks