LC Wool Pads for PC

**MinorDetailz** · 01-02-2008, 01:43 PM

What would be the recommendation for a wool pad under microfiber on a UD machine??

**Brace1** · 01-02-2008, 05:37 PM

Originally Posted by MinorDetailz

What would be the recommendation for a wool pad under microfiber on a UD machine??

I do this for AIO, polish and LSP removal, after wiping off the majority/excess product with a MF towel since the bonnets have minimal surface area. I have a PC, not UDM, but same concept.

**TOGWT** · 01-03-2008, 04:45 AM

Originally Posted by Ong~Bak

Buy it, if you do not like it I will buy it from you.
I use the purple foamed wool LC pad with Menzerna Nano P0 106FF
and I will not go back to the white foam, you will not be dissapointed.

Nano Polish (105FF) will remove 2500 grit, for light surface marring and / or surface finishing, cut 2.5 - gloss 5.0 for LSP ready use a primed White (softer less dense foam (70 PPI) with a light abrasive cutting action ) or an LC CCS purple foamed wool pad - 1100 RPM