Backing Plate on Rotary

[aflyvietguy]

i have a makita 9227 and i was looking at the backing plates but i dont know which ones to get. how do i know for sure that it will fit? and does the kit come with instructions on how to put it on?

sorry for these dumb questions, but any help would be nice.

[Z06-Goose]

Foam / Wool Pads & Accessories for Rotary/Circular Polishers
Rotary Flexible Backing Plate- Manufactured by Lake Country just for rotary polishers. Hook and loop backing plates for your makita 9227, Dewalt 849.

I have the Meguiars W65. It depends what size pads you have in mind. That will dictate the size of the BP you want to get. For the Makita, all screw-on type BP will work, but you can also get the drive adapter for self-centered type pads...

[aflyvietguy]

thanks. i bought the 7.5 inch LC CCS kit.
so i think a 6 inch backing plate would work?
and can anyone tell me how to put it on?

[ASPHALT ROCKET]

Push you lock button down on the rotary and screw the backing to the head of the rotary.

[aflyvietguy]

ok before i can screw on the backing plate i need to get this other plate off. but i have no idea how. here are some pics.

[Deep Gloss Auto Salon]

ok before i can screw on the backing plate i need to get this other plate off. but i have no idea how. here are some pics.

Same as Ashpalt said except unscrew instead of screw

Hold down the lock button on the head of the unit and simply unscrew

[aflyvietguy]

unscrew what?

[Deep Gloss Auto Salon]

unscrew what?

The backing plate....lol

Hold the locking button down and as you are holding it down spin the backing plate to unscrew it

[aflyvietguy]

i know that but how? did you look at the pictures?

my bad, i replied before u edited. illl try that