Thanks: 0
Likes: 0
Dislikes: 0
-
Backing Plate on Rotary
i have a makita 9227 and i was looking at the backing plates but i dont know which ones to get. how do i know for sure that it will fit? and does the kit come with instructions on how to put it on?
sorry for these dumb questions, but any help would be nice.
-
Re: Backing Plate on Rotary
Foam / Wool Pads & Accessories for Rotary/Circular Polishers
Rotary Flexible Backing Plate- Manufactured by Lake Country just for rotary polishers. Hook and loop backing plates for your makita 9227, Dewalt 849.
I have the Meguiars W65. It depends what size pads you have in mind. That will dictate the size of the BP you want to get. For the Makita, all screw-on type BP will work, but you can also get the drive adapter for self-centered type pads...
-Goose
2007 Avus Silver Audi RS4
2018 Black Redline Edition Chevy Silverado
-
Re: Backing Plate on Rotary
thanks. i bought the 7.5 inch LC CCS kit.
so i think a 6 inch backing plate would work?
and can anyone tell me how to put it on?
-
SELF BANNED
Re: Backing Plate on Rotary
Push you lock button down on the rotary and screw the backing to the head of the rotary.
-
-
Super Member
Re: Backing Plate on Rotary
Originally Posted by aflyvietguy
ok before i can screw on the backing plate i need to get this other plate off. but i have no idea how. here are some pics.
Same as Ashpalt said except unscrew instead of screw
Hold down the lock button on the head of the unit and simply unscrew
www.deep-gloss.com
Deep Gloss Auto Salon / Fine Automobile Detailing - Metro Detroit's Paint Correction Specialist
For Discriminating Automobile Enthusiasts Who Demand The Best
South East Michigan Automotive Detailing - Rochester Hills, Troy, Bloomfield Hills, Birmingham, Farmington Hills, South Lyon, West Bloomfield, Ann Arbor, Grand Rapids, Brighton, Grosse Point, Shelby Twp, Utica, Beverly Hills, Berkely, Walled Lake, Livonia, Novi, Wixom, Waterford, Clarkston
-
Re: Backing Plate on Rotary
-
Super Member
Re: Backing Plate on Rotary
Originally Posted by aflyvietguy
unscrew what?
The backing plate....lol
Hold the locking button down and as you are holding it down spin the backing plate to unscrew it
Last edited by Deep Gloss Auto Salon; 08-04-2008 at 02:28 PM.
www.deep-gloss.com
Deep Gloss Auto Salon / Fine Automobile Detailing - Metro Detroit's Paint Correction Specialist
For Discriminating Automobile Enthusiasts Who Demand The Best
South East Michigan Automotive Detailing - Rochester Hills, Troy, Bloomfield Hills, Birmingham, Farmington Hills, South Lyon, West Bloomfield, Ann Arbor, Grand Rapids, Brighton, Grosse Point, Shelby Twp, Utica, Beverly Hills, Berkely, Walled Lake, Livonia, Novi, Wixom, Waterford, Clarkston
-
Re: Backing Plate on Rotary
i know that but how? did you look at the pictures?
my bad, i replied before u edited. illl try that
Last edited by aflyvietguy; 08-04-2008 at 02:45 PM.
Similar Threads
-
By ABSAV in forum Hot topics & Frequently Asked Questions
Replies: 0
Last Post: 11-27-2020, 10:29 AM
-
By AZpolisher15 in forum Auto Detailing 101
Replies: 2
Last Post: 04-24-2017, 05:01 AM
-
By rmagnus in forum Rotary Buffers
Replies: 6
Last Post: 12-24-2012, 10:23 AM
-
By c5errr in forum Rotary Buffers
Replies: 2
Last Post: 07-11-2012, 09:56 AM
-
By Meghan in forum New Car Care Products
Replies: 0
Last Post: 03-11-2009, 01:18 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks