ONR dilution

[bry28956]

Hey guys, I just got some ONR to use as a clay lube, but have some questions. I diluted it 2 ounces of ONR to 1 gallon of water and for some reason it doesn't seem like that would be a good lube. However, that's what the bottle says to do. Any suggestions on if this is a good dilution ratio or do i need stronger?

[swanicyouth]

1:16 of ONR is the way to go for clay lube IMHO.

[Mask]

1:16 of ONR is the way to go for clay lube IMHO.

This ^^

[FUNX650]

ONR Dilutions...Per:
Label/Chris Thomas

Clay lube:
•1:64 = 2oz/1 gallon;
or:
•60 ml to 3.84 liters of water;
or:
•15.6 ml per liter of water.


Regarding "hard water":
Increase the ratio of the product dilution by 20%,
to adjust for minerals, if any, in the water used.


Bob

[mwoolfso]

Hey guys, I just got some ONR to use as a clay lube, but have some questions. I diluted it 2 ounces of ONR to 1 gallon of water and for some reason it doesn't seem like that would be a good lube. However, that's what the bottle says to do. Any suggestions on if this is a good dilution ratio or do i need stronger?

It is good enough unless you have really hard (well) water.

[Joe@NextLevelDetail]

8 oz for 1 gallon of distilled water is good for quick detail /lube

[GSKR]

You can virtually use any kind of lube.I use spray way foaming glass cleaner I just bought 80 cans at Home Depot the funny thing is I don't use it on windows. I use it for clayin and jambs I'm mobile here in south Florida and I can tell u 98 degrees with high humidity u need stuff that works I've tried them all there only one that doesn't give me problems at all ad it's not available in the stores .

[Mantilgh]

I use ONR in its rinse less ratio strait from the wash bucket. Wash a section, clay it, dry it, move on to the next. No issues.

[tpr1634]

just mixed a new gallon, 2oz onr.