Cant get swirls out!

[fauzool]

Well im using m205 and with white LCP and they wont come out!. They are the swirls that can only been seen in the sun. I did 4-5 passes several times and still they wont come out!. What am I doing wrong?

[Rsurfer]

Try using an orange pad and if that doesn't work, move up to Ultimate Compound with a white pad.

[fauzool]

Try using an orange pad and if that doesn't work, move up to Ultimate Compound with a white pad.

I tried the orange pad and well that didnt work either. You're saying ultimate compound? The scracthes are so fine they can only be seen in sun. I would think m205 and white should get them out.

[Rsurfer]

I tried the orange pad and well that didnt work either. You're saying ultimate compound? The scracthes are so fine they can only be seen in sun. I would think m205 and white should get them out.

Well if orange and 205 did not take it out your technique may be the problem or you need a heavier polish. Do smaller sections 18"X18" and slow arm speed (1 second per inch). BTW what buffer are you using?

[fauzool]

Well if orange and 205 did not take it out your technique may be the problem or you need a heavier polish. Do smaller sections 18"X18" and slow arm speed (1 second per inch). BTW what buffer are you using?

Im using the porter cable. Im putting decent pressure and am going fairly slow

[Billy Baldone]

What kind "of car?

[fauzool]

Camaro

[aim4squirrels]

Is the pad actually turning?
Might be too much pressure.

[Rsurfer]

Camaro

Your clear is hard and might need UC and finish down with Ultimate Polish or 205.

[fauzool]

Pad is turning not very fast but not too slow. i guess i can try an UC