Tags on microfiber towels

[Lustrous Detail]

I've been cutting the tags off. I'm afraid they may leave scratches. Do you guys do this too?

[VISITOR]

I always cut the tags off right before I wash/use them with these...

[Mask]

For me Microfiber with tag only use for interior
I just pull it off and wash.

[CDot]

I cut them off as well; no worries unless you are rubbing the edge that had the tag on the paint.

[d33p]

I slowly rip it off. You can then pull the remaining piece out with tweezers or sometimes your fingernails.

[Setec Astronomy]

I cut them off as well; no worries unless you are rubbing the edge that had the tag on the paint.

That's almost the same as not cutting it off, isn't it? Leaving a little edge of the tag? As d33p said, the best is to rip or cut it and pull what's left out. Actually the best is to buy towels that don't have sewn-in labels.

[af90]

That's almost the same as not cutting it off, isn't it? Leaving a little edge of the tag? As d33p said, the best is to rip or cut it and pull what's left out. Actually the best is to buy towels that don't have sewn-in labels.

I don't know of many quality towels that have sewn in tags. Most are stick on or don't have a tag at all.

[Setec Astronomy]

I don't know of many quality towels that have sewn in tags. Most are stick on or don't have a tag at all.

That is certainly true--today. Some of us have been buying MF towels longer than others.

[VISITOR]

Some of us have been buying MF towels longer than others.

you can say that again. I have enough to last for years....

[oldmodman]

I just tear them off by hand. No cutting, that leaves the sharp edge of the tag still in place.