I appreciated all the input you guys had last time on my last post. We are currently on a job doing a Highway Tractor and was asked to look at another truck while we were there. The hood has extensive damage to the clear coat and so I did a small patch. I hit it 2x with a foam pad with cutting compound. And followed it up with a finishing compound on a foam pad as well. The picture below is a result to that. I was wondering if we need more coats of cutting compound or if this should be wet sanded down.
A couple of pages in Tuscarora Dave starts talking about how he deals with really oxidized gelcoats. Lots of other good information there too about dealing with road tractors.
If you don't find the information you are looking for there and/or Dave doesn't respond to this thread. Post your question on that thread and he should see it.
____________
"The more answers I seek, the more questions I find."
If it's gelcoat, I'd give the new Optimum Gelcoat Restorer a try--I don't think they have it here yet. I just did a little experimentation with it the other day on some failed clear and I'm sure it would work even better on something it was intended for.
I appreciated all the input you guys had last time on my last post. We are currently on a job doing a Highway Tractor and was asked to look at another truck while we were there.
The hood has extensive damage to the clear coat and so I did a small patch. I hit it 2x with a foam pad with cutting compound. And followed it up with a finishing compound on a foam pad as well.
The picture below is a result to that. I was wondering if we need more coats of cutting compound or if this should be wet sanded down.
Any thoughts would be much appreciated.
Hi Tim,
Long time no see!
From the picture, I can't tell what's going on?
For those that don't recognize the forum nickname, Tim is an alumni student from our 2015 July Detailing Bootcamp class
The hood has extensive damage to the clear coat and
If the hood already has extensive damage to the clearcoat - it's time to repaint.
Even if you can improve it - what's left of the clear layer of paint will be both thin and fragile and likely won't hold up anyways.
I have a section in Renny Doyle's book and I share this topic in all my classes and that is sometimes it's better to turn work down then to try to fix it. Here's my article on this topic,
Yes. After all, he was unable to stop it, so what's the difference? One less VW microbus, I guess.
That was in Victorsville, California. It ended up in a guy’s front yard at the end of the street. The bus was fine, and no damage to the trailer. no one was injured. 70's Volkswagen Westfalia camper headlights are missing, so perhaps in mid-restoration. Not sure about the VW's clear coat.
Bookmarks