I think so, as the AR cannon comes with a nipple and a bayonet for the plastic lances on the 383 and lesser units. The 390SS' lance has a metal wand and standard 1/4" quick-release.
I wanted to pick that one up and be done with it, but I read a lot of reviews with the bottle head cracking and needed to have the entire bottle replaced. Might try it anyway since it's such a simple solution for the AR383.
Mine cracked and they replaced it free of charge. Just take good care of it and it will be fine.
I recently bought the AR foam cannon on Amazon which came with the adapter to fit right into my AR383. Questions for experienced users:
1) What ratio of soap to water do you use in the bottle? I use DG901. First try I used probably 1:2 product:water and the foam was too runny. Should I reverse that ratio and do 2:1 product:water?
2) What settings do you use on the 2 head adjustments? there is a black plastic dial on top and then the black rotating tip where the foam comes out with the 2 metal fins that open and close.
I recently bought the AR foam cannon on Amazon which came with the adapter to fit right into my AR383. Questions for experienced users:
1) What ratio of soap to water do you use in the bottle? I use DG901. First try I used probably 1:2 product:water and the foam was too runny. Should I reverse that ratio and do 2:1 product:water?
2) What settings do you use on the 2 head adjustments? there is a black plastic dial on top and then the black rotating tip where the foam comes out with the 2 metal fins that open and close.
Thanks in advance for any feedback!
Hi. I have the Ryobi 3100 PSI 2.5 GPM and it works great. I've never worried about ratio. HOT water about 1/3 first. Fill hyperwash to 1/2 or a little more. Top it off with HOT water.
Open tol knob all the way and the nozzle just play with what you like. Wide or narrow. Makes it thick. Love it. Bottom line just add soal to your liking.
Ryan
Sent from my SM-G965U using Autogeekonline mobile app
Bookmarks