How In The World

[CAMMIN HEMI]

How in the world do you guys do paint correction on a roof. I did my car last weekend standing on a ladder, hanging on with one hand for balance, and putting as much pressure on the PC as I could without fear of denting the roof but trying to use enough to remove defects. What a pain! Is there an easier way short of a sky hook! Thanks!!!!!!!!!!!!!!!!!!

John

[GenesisCoupe]

It is a challenge, especially when the roof has design creases of some sort.

Just gotta do it a small section at a time and hope for the best

[BobbyG]

Unless you're 6" 6" roofs can be a paint. A mall step ladder and a small aluminum platform I purchased at Lowe's and for the most part allows me to reach most areas...

By the way, I'm 6' 1".....

[DARK HORSE]

This works very well!

Werner 39-1/2 in. x 12 in. x 20-9/16 in. Aluminum Work Platform-AP-20 at The Home Depot










__________________

[Dr_Pain]

I don't know what you people are complaining about!?! I guess what BobbyG said must be true because I am 6'6" and love doing hoods, roofs and deck lids... I HATE ROCKERS!

[RevitalizeAutoSpa]

So what we're saying is 6'6" Dr. Pain and 5'5" myself should team up? He can do the roofs of SUVs, and I can do the rocker panels of Lambos...

[GreatAvalon]

Correct it and coat it - be done with it!!!

[FUNX650]

Safety First!!

Two step ladders and a scaffolding plank:



Bob

[TuxedoTaurus]

Safety First!!

Two step ladders and a scaffolding plank:



Bob

Those adjustable planks are really usefull, more cost effective approach would be to get a 2x12 or see if a lumber yard has a scrap 6' LVL. It would be heavier, but cheaper.

[BobbyG]

This works very well!

Werner 39-1/2 in. x 12 in. x 20-9/16 in. Aluminum Work Platform-AP-20 at The Home Depot

__________________

Tad, that's the one I was referring to!!