Coated my tires today and WOW,

[spazzz]

Here is a picture of my BFGoodrich a/t ta ko2 with the TW tire coating. I am going on three months and it still looks good. It's a shame they no longer sell it.

10.32 on the big A right now, with prime

[fejcharson]

Tw coating

[The Guz]

Has anyone tried top coating between applications of this stuff or is it just a waste of time??? Was thinking about hitting them with 303 or Natural Shine. Also, do the tires look really bad when the coating starts to deteriorate?

This is a waste of product. If there is still coating on the tire, it won't allow 303 to bond to anything. I would just spend the time and reapply the TW coating.

Nice to see a vendor come in with some advice.

That said, not too many of us never need to remove TW, it never peels, just fades over time. Besides that it's a rare item now so we wanna leave it on for as long as possible until something comes along to match it....if someone ever can

Sent from my LGLS990 using Tapatalk

You made me LOL on this comment.

Tw coating

It looks good. Did you brush it into those grooves seeing as the tire has an aggressive pattern?

[Klasse Act]

Guz, you know me so well 🙈🙉🙊

....but seriously, all I've heard about with that stuff is you have to clean and clean and clean and clean and clean and then, CLEAN the tire more. Then I remember reading about it peeling...no thanks, sorry. No peeling with TW, never.

In honor of my post I bought a TW kit off of EBay today, I have 5 kits and although I'm not lucky enough to find the kit for $2.00 I had to buy it, says his stock was almost gone and they sold 300 kits.

Sent from my LGLS990 using Tapatalk

[fejcharson]

This is a waste of product. If there is still coating on the tire, it won't allow 303 to bond to anything. I would just spend the time and reapply the TW coating.




You made me LOL on this comment.



It looks good. Did you brush it into those grooves seeing as the tire has an aggressive pattern?

I used the applicator that came with it for the flat parts then a tiny foam paint brush to get into the treads. Yes it was tedious, but it lasts so ill take the time and do it.

[FishyX]

Well, I curbed my front left on the way home from the cabin yesterday. Very easy to repair with a few quick swipes of the sponge and it blends in just fine.

[Klasse Act]

Well, I curbed my front left on the way home from the cabin yesterday. Very easy to repair with a few quick swipes of the sponge and it blends in just fine.

Are you still using the same sponge to reapply that already had the Turtle Wax Tire coating on it?

Sent from my LGLS990 using Tapatalk

[FishyX]

Are you still using the same sponge to reapply that already had the Turtle Wax Tire coating on it?

Sent from my LGLS990 using Tapatalk

I never cleaned the sponge after initial use and did use it for the touch up yesterday. I think I read something about wetting the sponge when it drys out but I didn't do that.

[Klasse Act]

I put it a zip-loc bag, that's all I ever do with it.

[FocusSTguy]

Just finishing up my first adventure with TW coatings. The trim coating is pretty easy to work with and looks great after 3 coats. I decided to remove the wheels to do the tire coating and I'm really glad I did cuz this stuff can be messy. After the tires were clean and dry I laid them flat on a table and taped off the rims which made application way easier. I went with 3 coats and quickly learned that it's better to apply in the shade when the tires are cool so that the product doesn't setup to fast. Tires look great with minimal streaking but are a little to shiny for my taste. I'll put up with glossy tires if this product turns out to be as durable as some claim. I'm really impressed by how nice the trim looks on my faded 2011 Ford Edge!!!!!

Three coats is a lot. I just do one good coat and buff with a towel. Gives the tires a nice natural look.