Opti-Coat 2.0 Behavior

[The Critic]

After washing, I took these videos of my parents' cars.

The white car was done about 2 months ago with Opti-Coat 2.0, and the red one was done about 1 month ago.

The white one was washed with Iron-X Snow Soap and the red one was done with Adam's Car Wash Shampoo.

Both cars seem to be bead/sheet a bit better than my car, but they're all in the same ballpark.

Is this normal behavior for Opti-Coat 2.0?

Thanks.

http://s161.photobucket.com/user/Sod...e74dd.mp4.html
IMG_1315_zps7bd5e29b.mp4 Video by SodaJunkie | Photobucket

[Anthony Onorato]

I'm actually not sure what you're asking about.

[mwoolfso]

I'm actually not sure what you're asking about.

+1 right. I am a bit confused myself. Even looking at the video of the white car the beading is extremely hard to see and near impossible to do a really good apples-apples comparison.

After washing, I took these videos of my parents' cars.

The white car was done about 2 months ago with Opti-Coat 2.0, and the red one was done about 1 month ago.

The white one was washed with Iron-X Snow Soap and the red one was done with Adam's Car Wash Shampoo.

Both cars seem to be bead/sheet a bit better than my car, but they're all in the same ballpark.

Is this normal behavior for Opti-Coat 2.0?

Thanks.

Since you are expecting us to assume your car beads/sheets similar to both cars shows, and the red car is the only one where I can see beading/sheeting, I'd say you are fine.

Assuming you car is not white, consider showing your car and the red car next time. That would permit us to see what you are seeing.

[The Critic]

Thanks. I was trying to see if the coating was acting the way it should when sprayed with water.

To clarify -- I coated the two cars that are posted above. I made the videos to share so that people can tell me if the coating adhered properly.