autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Regular Member
    Join Date
    Aug 2013
    Posts
    106
    Post Thanks / Like

    How to best clean LC Hydrotech pads??

    I used some LC Hydrotech flat pads yesterday for the first time. I must say, these pads seem to perform EXTREMELY well! However, I am very new to detailing and machine polishing and have only used one other type of pad before - Hex-Logic foam purchased from Chemical Guys - so I really don't have much to compare them to.

    The one thing I did discover though is that they are WAY harder to clean than the hex-logic pads. I have a Grit Guard Pad Washer system, and even that didn't seem to get all the residue out of the Hydrotech pads. I realize that they are a different kind of foam composition than the hex-logic, but does anyone have any suggestions on how to efficiently clean Hydrotech pads both on-the-fly and after the job? (More so on-the-fly)

    I will probably buy more pads so I can have the option of switching to a fresh pad while working, but would still like to know how to better clean them.

    Thanks!

  2. #2
    Super Member The Pad Man's Avatar
    Join Date
    Mar 2006
    Location
    Wisconsin
    Posts
    318
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    Fill a bucket with warm water and pad cleaning solution. Agitate by hand under water to circulate the cleaning solution through foam. Rinse with clean water, squeeze between a towel, let dry.

  3. #3
    Regular Member
    Join Date
    Aug 2013
    Posts
    106
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    Thanks Pad Man. What about for on-the-fly cleaning?

  4. #4
    Super Member
    Join Date
    Apr 2013
    Location
    Las Vegas
    Posts
    1,172
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    Definitely don't use a brush, mine got destroyed by it after just a few seconds.

  5. #5
    Regular Member Eric M.'s Avatar
    Join Date
    Jun 2013
    Location
    Ontario, Canada
    Posts
    141
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    I spray mine with apc let them sit for a minute and then use a brush to work the surface and rinse. I find they clean easier then regular foam pads.

  6. #6
    Regular Member
    Join Date
    Aug 2013
    Posts
    106
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    Eric, that certainly was not my experience with them. Once again, I've only had hex-logic pads and they came perfectly clean with the pad washer or even by hand after a few sprays of Chemical Guys Pad Cleaner (which I would spray on them undiluted) and rinsing with water. The Hydrotechs didn't respond well to either method.

  7. #7
    Regular Member Eric M.'s Avatar
    Join Date
    Jun 2013
    Location
    Ontario, Canada
    Posts
    141
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    What polish u using? I use menzerna and use those pads every week. Odd you're having such problems.

  8. #8
    SELF BANNED
    Join Date
    Mar 2013
    Location
    PA
    Posts
    207
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    pressure washer. 5-10 seconds perfectly clean

  9. #9
    Super Member ScottB's Avatar
    Join Date
    Mar 2006
    Location
    South Florida
    Posts
    18,803
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    DP Pad Rejuvinator .... just mix some up !


    Scott

  10. #10
    Super Member CEE DOG's Avatar
    Join Date
    Jul 2009
    Location
    Florida
    Posts
    7,358
    Post Thanks / Like

    Re: How to best clean LC Hydrotech pads??

    carefully, lol
    :dancebanana:

    Sky's the Limit Car Care

Page 1 of 2 12 LastLast

Similar Threads

  1. Polishes to use with HydroTech Pads
    By charlestek in forum Auto Detailing 101
    Replies: 17
    Last Post: 06-09-2019, 01:35 PM
  2. HD Speed and HydroTech Pads
    By Mike Honcho in forum Auto Detailing 101
    Replies: 4
    Last Post: 11-25-2015, 07:35 PM
  3. Hydrotech pads problems : Bad batch? Bad Pads?
    By R4IDER in forum Ask your detailing questions!
    Replies: 33
    Last Post: 10-10-2013, 07:26 AM
  4. Hydrotech pads
    By WRXINXS in forum Wool & Foam Buffing Pads
    Replies: 11
    Last Post: 04-19-2012, 06:23 PM
  5. New hydrotech pads dirty?
    By CEE DOG in forum Auto Detailing Tools and Accessories
    Replies: 12
    Last Post: 11-25-2009, 03:03 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234