How should I apply DG-105 ?

[adrynalinjunkie]

How should I apply Duragloss Polish Bonding Agent? Can/should I use my PC 7424? If so with what color pad?

Or should I just apply it by hand? I do have a few red LCC hand aplicators.

Same for the DG105 I am going to apply it over the hased bonding agent as the instructions sugest but with what The PC7424 or will it be just as easy by hand?

I did get the lambswool pad and the microfiber bonnets to go over it for buffing this stuff off with the PC7424. BTW

TIA, Zach

[Dougw4355]

Try maybe going thru some of mikes artices,,Much easier for me to point you to those instead of trying to explain some here.

Here is a link for starters


http://www.autogeekonline.net/forum/...s-new-you.html

What condition is the paint on your vehicles?

[Dougw4355]

I should of given you this link first


Good start point for reading

http://www.autogeekonline.net/forum/...-phillips.html

[dad07]

What kind of pads do you have? I use crimmson (red) lc hydrotech pads.

you can mix dg601(bonding agent) with 105 at a 4:1 ratio and apply at the same time.

[Chris's FX4]

I put the 601 on by hand with a MF applicator, and then apply 105 with a LC Crimson HT pad on my G110v2.

What some like to do is put a small mixture of 601 and 105 in a bottle, which essentially eliminates a step. Don't remember the exact ratios.

[Vegas Transplant]

What some like to do is put a small mixture of 601 and 105 in a bottle, which essentially eliminates a step. Don't remember the exact ratios.

combining Duragloss 601 with 105 or 501

[Mike T]

Is 601 considered a "paint cleaner" or really more practical for use after paint prep?

[ski2]

My understanding is that 601 is nothing more than a curing agent--allows you to add a second coat of 105 or whatever in 2 hours rather than 12.

DG now promotes mixing 601 with any of their durable polishes at a 1 part (601) to 4 parts (501,101,111,105) ratio then applying to the surface.

While applying by hand is fine I find I can get a much thinner, even coat of 105 using my GG DA on speed 2.5 - 3 with a red pad. Makes for very easy removal.

[Minoan212]

Like others said, I would mix the 105 and 601 together at a 4:1 ratio (105:601). I did this when I recently applied 111/601 and it worked out great.

[Mike T]

Excuse I ignorance, but how did you measure it out?