Thanks: 0
Likes: 0
Dislikes: 0
-
Newbie Member
RE: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
I'm doing this:
http://www.autogeekonline.net/forum/...tml#post313790
To my 79 Ranchero with black single stage paint and I have some questions and I'll have more as I continue to move forward.
I'm only doing the hood at this time.
Question one: I've done the initial wet and vigorous application of #7 and left overnight, then did a second application. On the second application, I removed the 7 just after I put it on the hood. Is this the correct procedure for applications after the first?
Question two: After the second application I have a deep glossy black, but it is looking like I will have to go at it with abrasives. Should I continue to put more applications of the 7, or go to an abrasive at this stage?
-
Super Member
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
I just got done doing this old ford. I polished then threw on the #7 came out really well. I will post a picture up for you tomorrow. I am on the internet at a hotel and my photobucket will not load.
Cars
1972 Chevy Nova
1994 Acura Integra
-
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
How many coats of #7 depends upon the condition of the paint. I put 12 coats on my 57, all allowed to sit overnight. With a 79. I would consider 3 or 4 coats, but I haven't seen the car. I apply until the paint stops absorbing the oils.
-
Newbie Member
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
And how do I know when the paint has stopped absorbing the oils?
-
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
Originally Posted by TwoFoolsAMinute
And how do I know when the paint has stopped absorbing the oils?
I know when it starts feeling slippery when I apply. When it is still absorbing, the paint feels a bit dry when you apply, and you have to rub hard. When the paint becomes saturated with oils, it feels oily and starts to stop absorbing them.
-
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
Originally Posted by TwoFoolsAMinute
I'm doing this:
http://www.autogeekonline.net/forum/...tml#post313790
To my 79 Ranchero with black single stage paint and I have some questions and I'll have more as I continue to move forward.
I'm only doing the hood at this time.
Question one: I've done the initial wet and vigorous application of #7 and left overnight, then did a second application. On the second application, I removed the 7 just after I put it on the hood. Is this the correct procedure for applications after the first?
How long you leave the second coat depends upon how bad or how dried out the paint is. In my article I'm applying multiple coats for two reasons...
1. Gorge the paint with oils, pushing them into the paint with each rubdown
2. Abrading the dead paint off, remember the article is also about "removing" oxidation without using abrasives and it's the "rubbing" of the nap of your cloth PLUS the oils as both a lubricant and a revitalizer that's doing the correction work, that plus elbow grease.
If the paint is not too bad on your Elky then 2-3 applications should be more than enough to do the job.
Originally Posted by TwoFoolsAMinute
Question two: After the second application I have a deep glossy black, but it is looking like I will have to go at it with abrasives. Should I continue to put more applications of the 7, or go to an abrasive at this stage?
By your description, time to go ahead and start abrading the paint, start with a medium cut polish, something safe like Pinnacle Advanced Swirl Remover.
Looking forward to your after pictures...
-
Newbie Member
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
After the initial application to half of the roof of the car.
-
Super Member
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
I used Mike's method on a 2002 Toyota with single stage white chalk.
I gave it five treatments with the Meguiars #7 before I felt that it was "full" and wouldn't eat any more.
Then polished as I normally would. Turned out better than I hoped it would.
-
Newbie Member
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
If my towel is still coming up black with the M07, does that mean I should keep going?
-
Re: Mike Phillips style Restoring Single Stage Paints on my Black Ranchero.
Originally Posted by TwoFoolsAMinute
If my towel is still coming up black with the M07, does that mean I should keep going?
No. That is not an indicator of being done. It will always come up black. However, as you get done, it will become black more slowly. You are still removing some paint thickness while doing this, so it cannot be done forever. You need to look at the paint and decide when done. #7 will make the paint look deep and rich, and will even remove some scratches, but the final shine will come from the finessing polish.
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 313
Last Post: 06-18-2022, 04:35 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 27
Last Post: 04-01-2021, 01:14 PM
-
By Speedviktm in forum Ask your detailing questions!
Replies: 12
Last Post: 03-05-2019, 05:24 PM
-
By Njohc in forum Auto Detailing 101
Replies: 12
Last Post: 08-08-2012, 04:43 PM
-
By Mike Phillips in forum How to articles
Replies: 6
Last Post: 05-01-2012, 08:47 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks