If you can feel an indentation, or use a toothpick or so to see if it snags, then pitting is your problem. If not seek another solution.
If its pitting, only recourse is stripping off protective barrier ( clear coat or poly film) followed by sanding and refinishing.
Last edited by twisted1; 04-04-2012 at 09:09 AM.
Twisted1
C.R.E.A.M. - Get Da Money___Dalla Dalla Bill Yall
I get similar spotting on the wheels of my Mini. Although mine isn't pitting but rather the ferrous material of the brakes embedding into the aluminum wheels. Iron X and clay bar gets them back to normal. Lne of these days I will seal them with some Opti Seal to slow this down.
Bookmarks