Washing problems?

[pcw25]

I know I just put a thread up, but I wanted to keep them separated. I use the softest towels, wash mitts, and everything else to wash my black Honda Pilot. I use DP soap, microfiber chenille wash mitt, and these really nice drying towels I bought at another distributor. I rinse my wash media after every panel. What am I doing wrong?

[ProMoDe]

What problems are you having?

[Black Car]

the problem is that it's honda paint. I have a black TL, I feel your pain.

[cobalt9123]

I'm going to guess swirls.

Two things:

1-Black is just about the worst color for swirl identification. It is extremely easy to spot swirls on a black car just by nature of the color.

2-Hondas are notorious for having soft paint. You can breathe on them wrong and instill a swirl.

Having a black honda is pretty much the worst of both worlds.

So, I guess I'm just the bearer of good news

[pcw25]

haha thanks guys! worst combo ever! Black Honda!

[Black Car]

maybe try opti-coat or cquartz.

[tw33k2514]

maybe try opti-coat or cquartz.

+1

best option for soft paint is to coat it.

[pcw25]

In fact I was debating opti-coating it...but it's "permanent" so when i couldn't take it anymore it would have to come off.

[Vegas Transplant]

I had a hard time trying to figure out the best product choices myself. That is until I slowed down and carefully read each product description. It was not until then that I had clarity.

+1 @ Tw33k2514.

[shoeless89]

In fact I was debating opti-coating it...but it's "permanent" so when i couldn't take it anymore it would have to come off.

It only kind of permanent ±2 years. And you could always polish it off if you wanted

Sent from my DROID Pro using Tapatalk