Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
How long is your process???...
Just curious to know how long your buffing process is taking, not including prep( ie: wash, tape, clay).
I'm still trying playing around on my personal vehicles with the Megs twins trying to get it down, but for clients I'm still using 3m perfect-it which usually takes me approximately 6-8 hours.
The reason I'm asking is b/c the owner of the vehicle I just finished, said to me twice,"You sure are putting a lot oh time into it". Now the way I took that was, Your taking too long....
I tried my best to explain to her the total process which, I'll be lucky if she understood half if it. But just to make sure it's not just me, how long does it take YOU?
The vehicle was a mid-size sedan, black in color, with moderate blemishes and swirls. I compounded, polished and sealed using a 9227, a 3401.
Like I said earlier, I'm just curious to know how long it's taking others to do the same job. And also respond with type of products and machine you use.
Thanks, very interested to see these responses....
-
Super Member
Re: How long is your process???...
Originally Posted by ALLN1WASH
Just curious to know how long your buffing process is taking, not including prep( ie: wash, tape, clay).
I'm still trying playing around on my personal vehicles with the Megs twins trying to get it down, but for clients I'm still using 3m perfect-it which usually takes me approximately 6-8 hours.
The reason I'm asking is b/c the owner of the vehicle I just finished, said to me twice,"You sure are putting a lot oh time into it". Now the way I took that was, Your taking too long....
I tried my best to explain to her the total process which, I'll be lucky if she understood half if it. But just to make sure it's not just me, how long does it take YOU?
The vehicle was a mid-size sedan, black in color, with moderate blemishes and swirls. I compounded, polished and sealed using a 9227, a 3401.
Like I said earlier, I'm just curious to know how long it's taking others to do the same job. And also respond with type of products and machine you use.
Thanks, very interested to see these responses....
Are you reffering to that windbag that stole $40 from you?
As for how long? Depends on which step and how many "Forum Breaks" I take
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Super Member
Re: How long is your process???...
No, that's wasn't me Flash! I did read that thread, and I'm not sure I would've compensated 40 for just water and electricity, jmo....
Anyhow, how long does your process take flash?
-
Super Member
Re: How long is your process???...
Originally Posted by ALLN1WASH
No, that's wasn't me Flash! I did read that thread, and I'm not sure I would've compensated 40 for just water and electricity, jmo....
Anyhow, how long does your process take flash?
It can vary, but generally
Step 1 ~ 1-1.5 hrs
Step 2 ~ 45 minutes- 1 hour
Step 3 ~ Same ^
==========================
Sorry about the mix up. I agree, that lady jammed dude with that $40 charge
Hey, I almost broke my ankle today
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Super Member
Re: How long is your process???...
it takes me forever to do a 3 step. id say about 12-16 hrs. i smoke alot of cigs too which doesnt make it any faster. oh yeah thats including prep work.
-
Super Member
Re: How long is your process???...
Originally Posted by jamores23
it takes me forever to do a 3 step. id say about 12-16 hrs. i smoke alot of cigs too which doesnt make it any faster. oh yeah thats including prep work.
Are you using a Rotory or DA?
The cigs will slow you down for sure
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Super Member
Re: How long is your process???...
6-10 hours...Depends on the sizes and how bad the paint is..
-
Super Member
Re: How long is your process???...
rotary with cig pads lol.
-
Regular Member
Re: How long is your process???...
On monday a black Lexus with horrible holograms all over it took 8 hours just the correction. but i would say on average 6hrs including prep.
-
Super Member
Re: How long is your process???...
Originally Posted by jamores23
rotary with cig pads lol.
Wonder what kinda cut a cigarette filter would offer
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
Similar Threads
-
By BluHeaven in forum Auto Detailing 101
Replies: 10
Last Post: 04-14-2013, 12:02 PM
-
By CWallace in forum Auto Detailing 101
Replies: 5
Last Post: 06-22-2012, 09:12 AM
-
By ScottB in forum How to Articles
Replies: 58
Last Post: 01-23-2011, 04:46 PM
-
By ScottB in forum Show N' Shine
Replies: 51
Last Post: 08-13-2009, 05:02 PM
-
By ScottB in forum Auto Detailing 101
Replies: 46
Last Post: 09-30-2007, 10:22 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks