3/4oz to seal a car??

**fredcandetail** · 12-03-2011, 01:53 PM

Don't know if you guys saw my post about finally getting around to using a sample of WGDPS las week ... But I just stepped out to my garage and see the the 2oz sample still on my shelf about 3/4 full meaning I used less than an ounce to do a Tahoe ... I never really gave thought to how much product I use when sealing as I always go thin but this is insane!
This sound about right to you guys?

**jjkacz** · 12-03-2011, 01:56 PM

I have experienced the same results wiht my WDGPS sample. It seems that when using a DA it does a great job of spreading it out.

**BobbyG** · 12-03-2011, 02:18 PM

An ounce is not allot of product but if you used a dual action polisher and didn't do the roof I'll bet you could do it with an ounce.....

**Black Car** · 12-03-2011, 02:22 PM

I agree...that stuff goes a looooong way

**yakky** · 12-03-2011, 02:26 PM

Both Blackfire and WGPS go really far. I've done smaller cars using about 1/2 or maybe a little less.

**Black Car** · 12-03-2011, 03:12 PM

I used BFWD on a black pad, did my friends truck...then did my car with the leftover product on the pad. Those black pads can really suck in the product though. I now reserve them for my paste wax.

**Bunky** · 12-03-2011, 04:52 PM

It is easy to use less than an ounce with DA on an intermediate sized vehicle. It can be done by hand but takes a little more effort.

**Dr Oldz** · 12-03-2011, 04:59 PM

I apply 845 with a DA and can get about 40 applications out of one bottle. Same goes for WG.

**tw33k2514** · 12-03-2011, 06:24 PM

I've got it down to a science almost.

SUV: 1oz
TRUCK: small 3/4oz large 1oz
CAR: 1/2oz to 3/4oz

**ScottB** · 12-03-2011, 06:28 PM

Its unfortunate that most still consider using an abundance of a product should mean more or longer protection, when it just makes it more difficult to remove the excess. Kudos for learning to use a sealant sparingly either by hand or machine.