Thanks: 0
Likes: 0
Dislikes: 0
-
same LC pad, using different types of XMT
my truck has some fine swirl, and plan on using the white LC pad with XMT#2 followed by the same white pad but this time use XMT#1, can i use the same LC white pad (that i used with the xMT#2) to use XMT#1. am i like cross contaminating the pad with both XMT #2 & #1. i am thinking it has to be a dedicated pad for each compound.
thank you.
-
everything I've ever read says not to use the same pad. you'll need a 2nd white pad. personally, the few times I have used my PC I use different pads. I'm sure everyone will agree.
-
Use a separate pad for each product. Might want to use XMT#3 (it's pretty mild), and then the XMT#1.
-
Super Member
I always use a seperate pad for each product or at least a seperate pad side. I use the Edge 2000 pads so when I switch products I just flip the pad over. Anyway, you could use the same pad, but you'll need to clean it before you use it with the 2nd polish and that can be a PITA because it will need to be pretty dry before you use it again. At $10-$18 per pad it's not a major investment to have more than one.
Similar Threads
-
By GastonOrsenigo in forum Ask your detailing questions!
Replies: 8
Last Post: 08-05-2020, 09:16 PM
-
By sito in forum Auto Detailing 101
Replies: 2
Last Post: 09-24-2017, 02:12 AM
-
By BrianMcLeod in forum Auto Detailing 101
Replies: 1
Last Post: 01-14-2014, 02:37 PM
-
By rockrash in forum Auto Detailing 101
Replies: 9
Last Post: 05-27-2012, 06:25 PM
-
By BooGTS in forum Auto Detailing 101
Replies: 12
Last Post: 04-23-2012, 01:57 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks