Thanks: 0
Likes: 0
Dislikes: 0
-
Anyone used LC Flat and Hydro-Tech cutting pads??
Does the cyan (blue) Hydro Tech have noticeably more cutting power than the LC FLAT orange, or vice versa?
-
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by 07 z-oh-6
Does the cyan (blue) Hydro Tech have noticeably more cutting power than the LC FLAT orange, or vice versa?
I love my tangerine and my cyan pads.
The cyan pads have a good bite, and finish great.
The tangerine like the cyan stays pretty firm and also has some good cutting for minor swirls.
I found both pads to achieve any desired results depending upon the compound/polish you use.
These pads have become my favorite pads. That's all I use for my Flex. I love them!
-Goose
2007 Avus Silver Audi RS4
2018 Black Redline Edition Chevy Silverado
-
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by Z06-Goose
I love my tangerine and my cyan pads.
The cyan pads have a good bite, and finish great.
The tangerine like the cyan stays pretty firm and also has some good cutting for minor swirls.
I found both pads to achieve any desired results depending upon the compound/polish you use.
These pads have become my favorite pads. That's all I use for my Flex. I love them!
I will be using Griots ROP with 105 w/ cyan hydro pad, then finishing w/ 205 and CCS white pad on my z06.
-
Super Member
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Using the Cyan pad with Menz PowerFinish is AMAZING!!! But I used a Makita.
Just know using a RO on your Vette clear coat is going to take a lot of time and patience.
-
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by Dust2Glory
Just know using a RO on your Vette clear coat is going to take a lot of time and patience.
That's what I'm concerned about. The new Griot's DA is pretty powerful though, so we'll see.
-
Super Member
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by 07 z-oh-6
That's what I'm concerned about. The new Griot's DA is pretty powerful though, so we'll see.
With 105 using a Griot should not take much...even on a Vette.
-
Super Member
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Yes the cc on your vette is very hard. But using 105/205 you'll be fine with the da. Yes it's not going to be as fast as a rotaray, but you'll get nice results pretty quick. Just remember to work a small section at a time approximately 18"x18". May want to consider finishing up with Menz 85rd on a blue LC CCS pad to take the finish to the next level.
-
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by Rsurfer
With 105 using a Griot should not take much...even on a Vette.
I just found this, and this is with the less powerful PC7424XP.
2008 Red Vette...The owner can now sleep at night - Corvette Forum
-
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by Dust2Glory
Just know using a RO on your Vette clear coat is going to take a lot of time and patience.
Will the Flex make matters any better compared to the Griot's 6"?
Last edited by WRAPT C5Z06; 12-27-2009 at 06:01 AM.
-
Super Member
Re: Anyone used LC Flat and Hydro-Tech cutting pads??
Originally Posted by 07 z-oh-6
Will the Flex make matters any better compared to the Griot's 6"?
Yes
Similar Threads
-
By neocoma in forum Ask your detailing questions!
Replies: 6
Last Post: 07-15-2016, 02:24 PM
-
By Ncs0816 in forum Wool & Foam Buffing Pads
Replies: 0
Last Post: 10-04-2013, 08:38 PM
-
By Ryan R in forum Auto Detailing 101
Replies: 11
Last Post: 04-30-2012, 09:47 AM
-
By pcw25 in forum Auto Detailing 101
Replies: 7
Last Post: 02-15-2012, 09:19 PM
-
By CEE DOG in forum Auto Detailing Tools and Accessories
Replies: 18
Last Post: 10-07-2009, 07:44 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks