lambs wool pads and bonnets--what are they good for?

**stevehecht** · 09-20-2009, 09:01 PM

I'm about to place an order with AG and I'm wondering what people use these products for. I've seen them mentioned in perusing the forum but I can't recall what they're good for.

**loudog2** · 09-20-2009, 09:21 PM

Sealant and wax removal

**stevehecht** · 09-20-2009, 09:27 PM

Originally Posted by loudog2

Sealant and wax removal

Can't I use a soft foam pad to do the same?

**loudog2** · 09-20-2009, 09:29 PM

Originally Posted by stevehecht

Can't I use a soft foam pad to do the same?

If you mean a bonnet over the pad, then yes. I've used a bonnet over a soft foam pad(LC red or blue)

**stevehecht** · 09-20-2009, 10:01 PM

Great, thanks for your help loudog. I like to save a few bucks where I can.

**Jimmie** · 09-20-2009, 11:16 PM

There is one application where they are crazy good. Use a bonnet to remove Rain X once applied to your glass. Makes a pain in the neck job quick and easy.
They always fill up with wax too quickly for me so I still remove waxes by hand.

**DLB** · 09-21-2009, 09:23 AM

Originally Posted by Jimmie

There is one application where they are crazy good. Use a bonnet to remove Rain X once applied to your glass. Makes a pain in the neck job quick and easy.
They always fill up with wax too quickly for me so I still remove waxes by hand.

I once saw a thread where Mike Phillips mentioned something about this.
He said to stop every once in a while and scratch across the pad with your fingernails (while spinning) and it would reduce the build up. IT SURELY DOES!
I used to use 2-4 bonnets removing wax from vehicles...I just did an Envoy SUV with one Friday.

FWIW, I use a lambswool for leveler under my bonnets. AG sent them to me with an order one time on some bonnets, and I got one in my PC Kit as well. Work great.

DLB

**CTS-Veo** · 09-21-2009, 09:33 AM

This may be a stupid question, but I think it goes along with the OP and this is the place to ask it.

If you look at any of the stock pictures of the PCXP (the pictures in the add), the PC has a thick white pad on it. This pad was included with the XP, and it is fastened to a backing plate (it's not removable via velcro or anything like that); so you screw it on, and when you're ready to remove it you unscrew it.

My question is: What is this white pad for? Is it a backing pad for using with a bonnet? Or does it have a cut to it?

**DLB** · 09-21-2009, 09:48 AM

Originally Posted by CTS-Veo

This may be a stupid question, but I think it goes along with the OP and this is the place to ask it.

If you look at any of the stock pictures of the PCXP (the pictures in the add), the PC has a thick white pad on it. This pad was included with the XP, and it is fastened to a backing plate (it's not removable via velcro or anything like that); so you screw it on, and when you're ready to remove it you unscrew it.

My question is: What is this white pad for? Is it a backing pad for using with a bonnet? Or does it have a cut to it?

From Porter Cable:
"Includes 6" polishing pad"

I assume that it is good for just that, polishing.
I used it once to polish some chrome bumpers just to see what it was like. It did fine on that. Didn't scratch but removed a few light spots (using some chrome polish I had).

DLB

**Emile** · 09-21-2009, 11:40 AM

The included white polishing pad is from Porter Cable and simply comes with the tool. Because the PC is so popular for polishing vehicle paint, Autogeek usually includes a Lake Country Backing Plate that is softer and conforms better to the curves of a vehicle, and uses the hook-and-look method for swapping foam pads in and out, which is much easier and more convenient.

To Porter Cable, the LC Backing Plate is an aftermarket third-party backing plate.

I like to use the microfiber bonnets around a lambswool leveling pad. You can use a regular foam pad but because the lambswool pad is softer, it can theoretically make for a smoother and easier experience when buffing off waxes and polishes.