Need Advice Buffing Fresh Paint

[RaskyR1]

Ask your uncle what he has done before you do anything though!!!!!!!!!!

I agree.

I would assume the car will have already been wet sanded and compounded before you get it. You will likely just have to check it over for any remaining sanding marks, tracers, or pig tails and deal with them first. Then it's just a matter of removing the deep holograms from the compounding. Just be sure that all your products are body shop safe.

[RaskyR1]

Better yet if the paint is only a week old and the person who painted it did a good job I would not try to buff it that does not make sense???? Only buff what needs to be buffed. Are you tryin to fix something the painter did?

I also agree with this.

Since you are only painting half the car, you want the new paint to match the texture of the factory paint. Most shops will only wet sand out the dust specs unless it a full repaint and the customer is willing to pay for a smooth finish.

[HMFIC]

Menzerna Micro Polish PO 87MC
WG Total Swirl Remover 3.0WG Finishing Glaze 3.0
CSS 7.5 pads blue and up

This is what I have to work with. I know he doesnt have a bake both. I will find out more today from my brother when he gets out of school. I would call my uncle but I let someone use my cell phone at work and they walked off with it. Leaving me with no phone numbers. DOH