menz ceramic question

**jad3N** · 11-20-2008, 11:31 AM

my ride is mitsubishi outlander 08, is it okay to use these products on my outie? SIP & 106FF.

**MoBenzOwner** · 11-20-2008, 12:13 PM

Use away. They are, as I am sure you know, made for the Mercedes ceramiclear but work fine on all clearcoats. I have never heard of any problems with these being used on any type clearcoat.
hth
Kevin

**Chris27182** · 11-20-2008, 12:42 PM

Im not so sure I would be using SIP on a japanese car. Its over kill, plus you would be removing unnecessary amounts of clear-coat. For example, I have removed swirls on an 07 Nissan Sentra with just Menzerna Final polish. I would use the XMT line of products good value for the money.

**ScottB** · 11-20-2008, 07:05 PM

I think they work well even on soft paints, and have seen no appreciable clearcoat wear. I would use them and I bet you might even see some correction a bit faster.

**Wendell Jarvis** · 11-21-2008, 07:29 AM

Originally Posted by killrwheels@autogeek

I think they work well even on soft paints, and have seen no appreciable clearcoat wear. I would use them and I bet you might even see some correction a bit faster.

**Wendell Jarvis** · 11-21-2008, 07:31 AM

Originally Posted by Wendell Jarvis

I have used Menz on several Nissan or Japanese cars without any removal of the clear coat, I only experinced improvements in the conditioning of the paint !!

**DrivingImpressions** · 11-21-2008, 10:48 AM

I own a Mitsubishi Endeavor and my wife has a Mitsubishi Galant. I have used SIP on both with great success.

**jad3N** · 11-21-2008, 07:53 PM

thanks everyone. i'm going with SIP -> PO106FA & WDGPS 3.0

**alowe** · 11-22-2008, 09:21 AM

Originally Posted by jad3N

thanks everyone. i'm going with SIP -> PO106FA & WDGPS 3.0

Nice choice, you will enjoy it!

**imageautodetail** · 11-22-2008, 09:46 AM

Originally Posted by Chris27182

Im not so sure I would be using SIP on a japanese car. Its over kill, plus you would be removing unnecessary amounts of clear-coat. For example, I have removed swirls on an 07 Nissan Sentra with just Menzerna Final polish. I would use the XMT line of products good value for the money.

It is never over kill if it is needed