steps for maximum results

[Wendell Jarvis]

First time using Wolfgang DGPS 3.0 wanted to know the steps for best results, I will be using , Menzerna PO 203 ( thought about using Pinnacle XMT360 first, but that seems redundent) when the Menzerna will definetly do most of that work, then apply a coat of Soveran paste, then the Wolfgang DGPS 3.0 and then finally another coat of Wolfgang ( just to make sure the car is completely covered)after I have taken taken off the first coat, topped with final coat of Soveran paste. Any comments on any additional steps I should take off, I am hoping that I am going to do this correctly. Any comments are welcome or suggestions.

[Rsurfer]

Why are putting a sealant over a nuba?

[charliehaley]

You need to do steps in this order or you will have problems:
1.Polish
2.Sealant (Wolfgang-1 or 2 coats with time to cure between)
3.Nuba (Souveran 1 or 2 coats if desired with time to cure in between)

[Wendell Jarvis]

Why are putting a sealant over a nuba?

Sorry, that was a typo, Menzerna then Wolf 3.0 then Soveran.........

[Wendell Jarvis]

Thanks Charlie, that was a typo earlier.......the steps below that you listed was what I meant to say, thanks for advice

You need to do steps in this order or you will have problems:
1.Polish
2.Sealant (Wolfgang-1 or 2 coats with time to cure between)
3.Nuba (Souveran 1 or 2 coats if desired with time to cure in between)

[Wendell Jarvis]

Why are putting a sealant over a nuba?

Typo error..........

[Rsurfer]

Be sure to do a IPA or prep sol wipe down after polishing to remove any oils before sealing. After wipe down take in the sun to see if you missed any marring.

[Rsurfer]

BTW do you have a 09 Max? Looks pretty dam good in the commericals.

[Wendell Jarvis]

Why are putting a sealant over a nuba?

Be sure to do a IPA or prep sol wipe down after polishing to remove any oils before sealing. After wipe down take in the sun to see if you missed any marring.

Thanks Rsurfer........appreciate your advice ( as I see you leave comments and advice for others here...so I certainly respect your opions and advice.....what is IPA ( sometimes acronyms kill me........lol ) but with the Menzerna PO 203 I really shouldn't experince any marring or haze......anyway thats what the specs said on it. What about using XMT360 ( cleaner, polish and seals)after Menzerna? or would that even leave more oil behind?

[Wendell Jarvis]

Yes....I do have the 09 Maxima, I held off on buying a new car for about a year and a half, after I heard that Nissan was changing and redesigning the Maxima ( back to its roots, more of a sports car sedan) and it kicks butt !! Thought about the new Honda Accord, but man once I test drove this puppy I was hooked.....I had a 98 Maxima years ago and really liked it too.......but the new 09....its fun to drive.

BTW do you have a 09 Max? Looks pretty dam good in the commericals.