-
Super Member
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
I did the lenses on my TT by hand with 4 grits of wet dry and finished with Hyper Compound and Hyper Polish.
It took forever
I’d look into one of the $25 kits with sanding discs and a backing plate you can chuck into a drill
I shudder anytime someone mentions acetone and car in the same sentence
I know there’s a formula for paint wipe using acetone but I’ve seen too much plastic instantly crazed by acetone
🤷🏻#♂️
Sent from my iPhone using Autogeekonline mobile app
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
I did some looking around and most of the kits I saw are a magical solution of unicorn tears that you wipe on and it instantly clears the plastic and rainbows come out and stuff
Mother’s has a kit with the backing plate for a drill, what looks like foam backed abrasive discs, a compound and a fluffy looking buffing “ball”
I haven’t used it so I can’t say if it’s worth the $ but it looks a lot less like smoke and mirrors than the other kits
Meguiar’s has a kit as well but they include hand held abrasives instead of drill driven
Both were in the $20-25 range
I’m not familiar with the oversprayed taillight deal so I don’t really have any ideas other than paint stripper or something but that could get sketchy
Sent from my iPhone using Autogeekonline mobile app
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
Originally Posted by
chilly
I did some looking around and most of the kits I saw are a magical solution of unicorn tears that you wipe on and it instantly clears the plastic and rainbows come out and stuff
Mother’s has a kit with the backing plate for a drill, what looks like foam backed abrasive discs, a compound and a fluffy looking buffing “ball”
I haven’t used it so I can’t say if it’s worth the $ but it looks a lot less like smoke and mirrors than the other kits
Meguiar’s has a kit as well but they include hand held abrasives instead of drill driven
Both were in the $20-25 range
I’m not familiar with the oversprayed taillight deal so I don’t really have any ideas other than paint stripper or something but that could get sketchy
Sent from my iPhone using
Autogeekonline mobile app
Hey Mikey........ Empty out your PM box.
It is no coincidence that man's best friend cannot talk.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
Originally Posted by
PaulMys
Hey Mikey........ Empty out your PM box.
I made some room…
lol
Sent from my iPhone using Autogeekonline mobile app
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
No recommendations to answer the original question(s)...
But...
As far as the acetone you're considering on the tail lamps - Don't! Or at least don't use it without a small, inconspicuous test spot.
I'm not sure what type of plastic newer lenses are made from, but in the past, I've seen acetone melt tail and parking lamp lenses.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Polishing headlights and removing taillight spray tint
I wouldn’t bother trying to waste too much time restoring that grill. It’ll take too much time and won’t last as long as it takes. I’d clean it up real quick, blow dry it, and spray some Stoners Trim Shine or similar aerosol trim coating on it.
As far as the lights, 1st thing I’d do is either Mothers Mag & Aluminum Polish with a cutting pad on speed 4.5
Either that or Megs Plastx.
If that doesn’t cut it then you’ll know you have to sand.
Remember to open the hood when you’re polishing with the 3” pad.
Btw as far as that grill, is that even the real finish or is that Plastidip we’re looking at?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
Originally Posted by
Eldorado2k
I wouldn’t bother trying to waste too much time restoring that grill. It’ll take too much time and won’t last as long as it takes. I’d clean it up real quick, blow dry it, and spray some Stoners Trim Shine or similar aerosol trim coating on it.
As far as the lights, 1st thing I’d do is either Mothers Mag & Aluminum Polish with a cutting pad on speed 4.5
Either that or Megs Plastx.
If that doesn’t cut it then you’ll know you have to sand.
Remember to open the hood when you’re polishing with the 3” pad.
Btw as far as that grill, is that even the real finish or is that Plastidip we’re looking at?
Real finish. Never treated. Looks pretty trashed
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing headlights and removing taillight spray tint
Originally Posted by
chilly
I did some looking around and most of the kits I saw are a magical solution of unicorn tears that you wipe on and it instantly clears the plastic and rainbows come out and stuff
Mother’s has a kit with the backing plate for a drill, what looks like foam backed abrasive discs, a compound and a fluffy looking buffing “ball”
I haven’t used it so I can’t say if it’s worth the $ but it looks a lot less like smoke and mirrors than the other kits
Meguiar’s has a kit as well but they include hand held abrasives instead of drill driven
Both were in the $20-25 range
I’m not familiar with the oversprayed taillight deal so I don’t really have any ideas other than paint stripper or something but that could get sketchy
Sent from my iPhone using
Autogeekonline mobile app
Griots has a kit I think I will try. Have mothers mag and wheel polish also and will give it a go [mention]Eldorado2k [/mention]
Sent from my iPhone using Tapatalk
-
Super Member
Re: Polishing headlights and removing taillight spray tint
Originally Posted by
2black1s
No recommendations to answer the original question(s)...
But...
As far as the acetone you're considering on the tail lamps - Don't! Or at least don't use it without a small, inconspicuous test spot.
I'm not sure what type of plastic newer lenses are made from, but in the past, I've seen acetone melt tail and parking lamp lenses.
I saw a video where a guy used gasoline. What do you think of that?
Sent from my iPhone using Tapatalk
Bookmarks