-
Super Member
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Jeep Bumper - Dye needed, or just a coating
Both are good results, gents!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
ejaf thanked for this post
-
Super Member
Re: Jeep Bumper - Dye needed, or just a coating
Originally Posted by
ejaf
Hard to get good photos of this...
Here's the before and after. 3 scrub downs, followed by 25% alcohol wipe down, and application (1 coat) of DLux. Tried a regular ceramic, no discernable difference.
I think may be too a&* retentive; I have much more respect for you all making a living doing this
Before (definitely didn't look as gray as that in real life, compared to the after photo):
Attachment 76930
After:
Attachment 76931
Also...very very difficult to get a representative photo of what I was seeing. I am happy with the results, and will heed the 6 month regiment. The fender flares, front cowling, and door handles were a lot easier; they do not have as deep a dimple pattern as the front and rear bumpers.
Nice results. What method ended up working for you.
-
Re: Jeep Bumper - Dye needed, or just a coating
Originally Posted by
The Guz
Nice results. What method ended up working for you.
Mentioned it in the thread with pictures...3 scrubs with APC, followed by 25% IPA wipedown, and coat of DLux.
Didn't want to go with Solution Finish...several threads here in the past mentioned splotchiness after already applied coating, and I couldn't convince my better half I needed it
Bookmarks