Dislikes: 0
-
Anyone switch to the ONE-bucket method?
I've been using the two-bucket method for washing cars for many years. However, I'm starting to notice on YouTube that many detailers have moved to the one-bucket method whereby they no longer use a wash mitt and instead dump like 20 microfiber towels in the wash bucket. They use 1 microfiber towel per section of the vehicle and then put the towel aside. They rinse and move to the next section and grab a fresh microfiber towel. Rinse and repeat.
I understand the logic in it. Basically, your chance for scratches is reduced because you are using a fresh microfiber towel every time whereas with the two-bucket method you are trying to clean out the mitt each time. Yes, there are some initial front-end costs you'll need to pay for all the towels, but doesn't seem too significant.
So, my question isn't around which one does a better job (seems like the one-bucket would be better), but in efficiency and time spent. At first I thought the one-bucket method would be much faster and it seems like when you are actually washing the car it would be, but what about the back-end time once you are done? I don't wash my good mitts in a washing machine. I rinse them thoroughly once I'm done and hang it to dry. Done. I'm wondering about what people are doing with all these microfiber towels once they are done washing the vehicle. Are they really rinsing each one out to ensure they don't have any dirt in them? Seems like a lot of time. OR are they throwing them all in the washing machine and letting it do the work. Still, more time, but maybe less than the overall time used with the two-bucket method?
Just seeking out others who might have tried the one-bucket method and their opinion. Thanks.
-
Re: Anyone switch to the ONE-bucket method?
I use the one bucket method when I foam cannon and when I rinseless wash.
Gasp.
Works for me.
I find something I like and works for me and don't worry about some specific youtuber's process.
What works for one person may not be for another person.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Anyone switch to the ONE-bucket method?
One bucket with 5-6 noodle type wash mitts. Wash mitts are easier to control and doesn't bunch up like mf towels.
Spray inside the mitts and rinse the outside which already has soap and hang out to dry. I guess maybe throwing them in a washer might do a better job of cleaning, but I've never noticed any dirt or debris using the hose method of cleaning.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Anyone switch to the ONE-bucket method?
I don’t use any buckets at all. Just multiple mitts. That is, when my car is even that dirty to need it.
Treat it like it's the only one in the world.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Anyone switch to the ONE-bucket method?
I use the five bucket method.
One with soap, four with only water. Each water bucket has three grit guards.
Every time I go to reload my brush with soap I first dip it five times in each water bucket, twenty total water dips, then I dip it in the soap.
…
I’m just kidding.
I use one bucket, one boars hair brush, and lots of soap. No grit guard.
*GASP*
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Anyone switch to the ONE-bucket method?
Imma just leave this here
Sent from my iPhone using Tapatalk
-
Super Member
Re: Anyone switch to the ONE-bucket method?
Originally Posted by Eric7810
I use the five bucket method.
One with soap, four with only water. Each water bucket has three grit guards.
Every time I go to reload my brush with soap I first dip it five times in each water bucket, twenty total water dips, then I dip it in the soap.
…
I’m just kidding.
I use one bucket, one boars hair brush, and lots of soap. No grit guard.
*GASP*
Sent from my iPhone using Tapatalk
Good one there Eric, you had me going for awhile.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Anyone switch to the ONE-bucket method?
It is no coincidence that man's best friend cannot talk.
-
Re: Anyone switch to the ONE-bucket method?
The one bucket method is the Gary Dean rinseless wash method… Find it on YouTube…. I’ve been doing it for 12 years, never scratched a car yet.
and 20 microfibers is ridiculous, I can do my car with five.
-
Super Member
Re: Anyone switch to the ONE-bucket method?
when using the foam gun, i only use one bucket to rinse with an occasional blast of water to the mitt depending on how dirty it gets...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
DFB liked this post
Similar Threads
-
By WRXINXS in forum Auto Detailing 101
Replies: 19
Last Post: 01-27-2013, 08:38 PM
-
By richy in forum Off-Topic
Replies: 15
Last Post: 01-11-2013, 07:26 PM
-
By djrazr in forum Auto Detailing 101
Replies: 2
Last Post: 03-21-2008, 03:18 PM
-
By chrisbothwell in forum Auto Detailing 101
Replies: 7
Last Post: 08-31-2007, 10:53 AM
-
By tnbug4me in forum Auto Detailing 101
Replies: 10
Last Post: 06-24-2007, 11:30 AM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks