First day using Bilt Hamber touchless.

[CleanIT]

The more I think about it, it shouldn't be a surprise considering the pressure from the garden hose was inadequate. PW would have easily taken it off.

[opie]

Yeah just a garden hose.

Yeah a pw would have blew that film right off.

Sent from my SM-S901U using Tapatalk

[Coatingsarecrack]

Just a heads up for all with a pressure washer but I find AutoFoam to work a good bit better than touchless. Both great products and maybe it’s the NW grime but don’t sleep on AF y’all.

BH does say one or the other may work better due to different environmental fall out and traffic film.

Anyone reading that s thinking about which one to get, splurge and buy both. You’ll figure which one works best and focus on that in the future.

While you have both use the less lethal one during summer months.


Sent from my iPhone using Tapatalk

[CleanIT]

Just a heads up for all with a pressure washer but I find AutoFoam to work a good bit better than touchless. Both great products and maybe it’s the NW grime but don’t sleep on AF y’all.

BH does say one or the other may work better due to different environmental fall out and traffic film.

Anyone reading that s thinking about which one to get, splurge and buy both. You’ll figure which one works best and focus on that in the future.

While you have both use the less lethal one during summer months.


Sent from my iPhone using Tapatalk

Good to know. I thought I read that before. I have a gas powered power washer that works great. It's just super loud. Thinking of a getting an inexpensive electric I can just use for car washes.

[CleanIT]

Used BH Touchless again last night using a Marolex sprayer but this time a power washer. Worked great. The solution was saturating the surface and I really was able to get the Touchless solution everywhere with it. Cleans exceptionally well. I followed up with Ech20. Skipped the bucket wash.

[briarpatch]

Used BH Touchless again last night using a Marolex sprayer but this time a power washer. Worked great. The solution was saturating the surface and I really was able to get the Touchless solution everywhere with it. Cleans exceptionally well. I followed up with Ech20. Skipped the bucket wash.

Did you feel like it did a better job with the saturation/heavy lifting than with a foamer?

[Klasse Act]

Used BH Touchless again last night using a Marolex sprayer but this time a power washer. Worked great. The solution was saturating the surface and I really was able to get the Touchless solution everywhere with it. Cleans exceptionally well. I followed up with Ech20. Skipped the bucket wash.

Dwell time? I saw Pan's video where he used the Marolex and the IK foamer and it wasn't even close....IK FTW! Check out the video

Sent from my SM-G991U using Tapatalk

[CleanIT]

Dwell time? I saw Pan's video where he used the Marolex and the IK foamer and it wasn't even close....IK FTW! Check out the video

Sent from my SM-G991U using Tapatalk

I was able to let it dwell for a solid 4-5 minutes. I did it in a garage where there was no light and surface was cool to the touch. Foam is probably better, but I think I prefer the Marolex honestly. I completely saturated the car until it was soaking wet with BH Touchless.

Foam Cannon vs Pump Sprayer | Bilt Hamber Auto Foam Application Method - YouTube

[Klasse Act]

I was able to let it dwell for a solid 4-5 minutes. I did it in a garage where there was no light and surface was cool to the touch. Foam is probably better, but I think I prefer the Marolex honestly. I completely saturated the car until it was soaking wet with BH Touchless.

Foam Cannon vs Pump Sprayer | Bilt Hamber Auto Foam Application Method - YouTube

Yeah it's not even close with the spray pattern, no trick video here

Sent from my SM-G991U using Tapatalk

[CleanIT]

Yeah it's not even close with the spray pattern, no trick video here

Sent from my SM-G991U using Tapatalk

I'm going to keep playing around with both methods and see which I prefer. Dwell time favors foaming. Either way it's an awesome product.

All BH needs is a great coating and sealant and they'd have a killer line. Touch-On looks comparable to Wet Coat. They need a better coating product.