User friendly ceramic coating with a slick finish?

**Sonic Pilot** · 04-25-2022, 11:50 AM

Hello...

Are there any ceramic coatings that have a nice SLICK finish when cured...and that are relatively easy to apply?

**Loach** · 04-25-2022, 12:27 PM

Gyeon's latest Moh's EVO is worth checking out for slickness. Still not Power Lock level slickness but great slickness for a coating. Skip the Syncro kit, the new Skin EVO takes away from the slickness of Mohs.

**hoyt66** · 04-25-2022, 01:44 PM

I have always been impressed with CSL before EXO application. So slick!

**Sonic Pilot** · 04-25-2022, 02:02 PM

Originally Posted by hoyt66

I have always been impressed with CSL before EXO application. So slick!

Ahh....what is CSL and EXO?

**TTQ B4U** · 04-25-2022, 02:08 PM

CarPro SiC

Sent from my SM-G988U using Tapatalk

**Rsurfer** · 04-25-2022, 02:16 PM

Originally Posted by TTQ B4U

CarPro SiC

Sent from my SM-G988U using Tapatalk

Second SIC

**Paul A.** · 04-25-2022, 02:56 PM

CSL = GTechniq Crystal Serum Light and I agree. Feels sooo slick going on and towelling off any residue.

**The Guz** · 04-25-2022, 04:48 PM

Gyeon Mohs Evo, Poorboys Ceramic and Cquartz SiC.

SiC takes a little more effort due to figuring out the flash times.

CSL is slick as well. Exo takes some of it away. Mohs Evo is much better than CSL these days.

Poorboys is easy to work with and of course pretty cheap.

The slickness does not last long with any of these. Roughly about 3 months.

**WhiteShadow89** · 04-25-2022, 05:52 PM

For user friendliness and longevity I am a fan of Gtechniq CSL + EXO. As Guz said EXO does take away some slickness; however it makes up for that in the gloss and repellency added to your applied areas.

**The Guz** · 04-25-2022, 07:20 PM

One more thing to add. I would take doing one layer with the new Mohs Evo or Poorboys then doing 3 with CSL/Exo.

Even ONR layer of Cquartz SiC will work fine.