Dislikes: 0
-
Correction/Ceramic new Black F 250
I have a new F250 in Agate Black on order. I don’t know the hardness of this paint or how soon I should do any corrections. It is supposed to be here in either March or April. Looking for some advice on what to do once I get it home. Don’t waste your time and mine with any negative thoughts on owing a black vehicle. I get it. Having said that, do you think this will need any claying or major corrections prior to ceramic coating? What products steps would you suggest once I get this home? Unfortunately this will not fit in my garage (at least for the next year), so it will be out in the elements. I’ve done correction on several vehicles, but never ceramic. I do have Wolfgang Perfekt Prep, Uber Ceramic Spray Coating as well as Midnight Sun wax, but I have never of those . Any “Positive “ suggestions will be much appreciated!
-
Super Member
Re: Correction/Ceramic new Black F 250
Hard to say until you physically get the truck and inspect it. More than likely it will need an iron remover and a polish at a minimum. Hard to say if you need to clay and or compound.
As far as products it depends on the polishes you have in your possession. Everyone has their preference and you will get many different recommendations so be ready to do some research on that.
For a coating I would consider one of the new Gyeon Evo coatings. Potentially starting with CanCoat Evo as they can be applied outside. I have reviews on the new coatings on this forum.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Correction/Ceramic new Black F 250
The Guz pretty much nailed it.
You will have to inspect the truck for yourself and assess what it might need.
Working for a Ford dealer and being responsible for checking in all new arrivals, I can tell you that this time of year the vehicles can roll off of the haulers extremely filthy. I see by your info you are in Rochester. I'm assuming that is Rochester, NY. So you know what I mean.....
(For the forum, that is about 75 miles east of Buffalo).
And just a heads-up: I hope your new F-250 arrives in March or April. Those Super Duty trucks are arriving at a snails pace. They shut that plant down for a few weeks 2-3 times since Covid, and the "recovery" has been awful to say the least.
It is no coincidence that man's best friend cannot talk.
-
Re: Correction/Ceramic new Black F 250
Start with telling the dealer absolutely do not wash the truck. this minimizes the amount of correction needed
-
Post Thanks / Like - 1 Thanks, 4 Likes, 0 Dislikes
-
Re: Correction/Ceramic new Black F 250
Thanks for your suggestions! I will take a look at your reviews.
-
Re: Correction/Ceramic new Black F 250
You're right. The can do more damage than good sometimes!
-
Re: Correction/Ceramic new Black F 250
I would guess between the trains from Kentucky and then the truck to the dealer they can get pretty filthy. I really want my truck since I have had my order since August, but I would can afford to wait until the snow is gone
-
Super Member
Re: Correction/Ceramic new Black F 250
Patience is key. If the weather is still unfavorable when you take delivery, take a deep breath, and deal with a dirty truck until you can do it right. I owned two consecutive black cars, so I've had to learn over time to accept less than perfection in winter in order to preserve the paint.
Like many have said already, let the paint be your guide. Don't automatically assume you need to do a full compound and polish. If all goes well, a light polishing may be all that's needed before applying the coating. Even if the finish appears to be nearly perfect it isn't a bad idea to do a LIGHT polishing before applying the coating simply to amp up the shine a bit before locking everything down with a coating.
Last spring my son-in-law got a new car. Despite the paint being in great shape I gave it a light polish before coating it, and the difference in the gloss and shine were quite noticeable.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Correction/Ceramic new Black F 250
Originally Posted by Deano_1
I have a new F250 in Agate Black on order. I don’t know the hardness of this paint or how soon I should do any corrections. It is supposed to be here in either March or April. Looking for some advice on what to do once I get it home. Don’t waste your time and mine with any negative thoughts on owing a black vehicle. I get it. Having said that, do you think this will need any claying or major corrections prior to ceramic coating? What products steps would you suggest once I get this home? Unfortunately this will not fit in my garage (at least for the next year), so it will be out in the elements. I’ve done correction on several vehicles, but never ceramic. I do have Wolfgang Perfekt Prep, Uber Ceramic Spray Coating as well as Midnight Sun wax, but I have never of those . Any “Positive “ suggestions will be much appreciated!
Congrats on your new part-time job.
-
Super Member
Re: Correction/Ceramic new Black F 250
I love black cars, and the next one I buy will be black. I've had one in the past too.
We get a lot of cars that were freshly delivered to the dealerships.
I remember one little yellow Toyota that came right off the truck to the shop. It still had protective plastic still on the paint.
It also had some really heavy contamination that took a red nanoskin clay block to remove. Yours could show up in an unpredictable condition. It might look great, or it could need some TLC.
After the wash and decon I polished it with Menzerna MC2500, panel wiped with Car Pro Eraser, and coated with Ceramic Pro 9H (not recommend) before it was picked up.
Having a variety of polishes (I like heavy, medium, and fine) and pads is nice to be able to remedy whatever condition the vehicle is in.
I'm becoming a fan of synergistic systems. I haven't used the Wolfgang stuff personally, but it is very highly regarded.
I would try to stay in that range if that idea interests you. That way you'll know that the products are compatible, but then again. I've done fine with a'la carte-ing from whatever is in the arsenal. I believe they have a "swirl remover" that is similar to that Menzerna 2500. Their spray coating should be fine for outdoor use.
Optimum Gloss Coat is the only coating I ever applied outside, and it was in shade provided by a maple tree. I probably wouldn't want to do that in the blazing sun!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By DetailedByPrecision in forum Show N' Shine
Replies: 4
Last Post: 03-19-2019, 05:57 PM
-
By Wills.WindowsAndWheels in forum Show N' Shine
Replies: 19
Last Post: 06-20-2017, 03:04 PM
-
By RaskyR1 in forum Show N' Shine
Replies: 14
Last Post: 10-05-2016, 10:39 AM
-
By KoshiL in forum Show N' Shine
Replies: 21
Last Post: 03-19-2016, 01:13 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks