-
CP Essence Plus drying aid / topper?
Suggestions for a drying aid, topper?
Applied Essence Plus to my aging CP coating. I am not a fan of Reload, or eliXir, and will probably go a different direction once the coating finally fails and needs to be redone.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: CP Essence Plus drying aid / topper?
I so far have had issue with Elixir and NV Boost as drying aids on CQ Lite. Have tried numerous methods and they both still streak and ‘haze’. Looks horrible the next day. My car is black.
Will be trying Megs Hybrid Ceramic Detailer and Gyeon Ceramic Detailer next.
Interested to hear what others have had success with.
Sent from my iPhone using Tapatalk
-
Re: CP Essence Plus drying aid / topper?
I to have a black vehicle (never again!)
-
Re: CP Essence Plus drying aid / topper?
Originally Posted by
kenshotx
I to have a black vehicle (never again!)
They look amazing when you get them right but make it so hard for toppers/drying aids!
I used to wash with no drying aid and the car would look perfect. I’d continue this if I wasn’t convinced I needed some lubrication for the towel.
Sent from my iPhone using Tapatalk
-
Super Member
Re: CP Essence Plus drying aid / topper?
Originally Posted by
rover137
I so far have had issue with Elixir and NV Boost as drying aids on CQ Lite. Have tried numerous methods and they both still streak and ‘haze’. Looks horrible the next day. My car is black.
Will be trying Megs Hybrid Ceramic Detailer and Gyeon Ceramic Detailer next.
Interested to hear what others have had success with.
Sent from my iPhone using Tapatalk
How much are you using? Boost has worked great as a drying aid, have not tried Elixer. Make sure your using a spray to two sprays per panel.
Not a fan of most of the TW Hybrid solution line but there drying aid Ceramic WetWax is a winner.
My favorite drying aid is Ammo Hydrate.
Biggest thing tho is not to use too much.
Used most of this on a black mustang with CquK3.0.
Sent from my iPhone using Tapatalk
-
Re: CP Essence Plus drying aid / topper?
Originally Posted by
Coatingsarecrack
How much are you using? Boost has worked great as a drying aid, have not tried Elixer. Make sure your using a spray to two sprays per panel.
Not a fan of most of the TW Hybrid solution line but there drying aid Ceramic WetWax is a winner.
My favorite drying aid is Ammo Hydrate.
Biggest thing tho is not to use too much.
Used most of this on a black mustang with CquK3.0.
Sent from my iPhone using Tapatalk
Have tried different amounts but best results (still very streaky) are with 1-2 per panel and 2-3 per bigger panel (roof, hood). Boost I’ve found is really grabby to apply and grabby after application. Like really really grabby. Elixir was very slick during application and after.
I have a couple bottles of NV Evo to put on our cars next so I’m thinking about retiring Boost until Evo goes on given it’s quite exxy and I imagine it to pair best with Evo.
Sent from my iPhone using Tapatalk
-
Super Member
Re: CP Essence Plus drying aid / topper?
Originally Posted by
rover137
Have tried different amounts but best results (still very streaky) are with 1-2 per panel and 2-3 per bigger panel (roof, hood). Boost I’ve found is really grabby to apply and grabby after application. Like really really grabby. Elixir was very slick during application and after.
I have a couple bottles of NV Evo to put on our cars next so I’m thinking about retiring Boost until Evo goes on given it’s quite exxy and I imagine it to pair best with Evo.
Sent from my iPhone using Tapatalk
Hmmm weird i found boost easy to apply, dry or as a drying aid. Didn’t feel slick after though.
Sent from my iPhone using Tapatalk
-
Re: CP Essence Plus drying aid / topper?
Originally Posted by
Coatingsarecrack
Hmmm weird i found boost easy to apply, dry or as a drying aid. Didn’t feel slick after though.
Sent from my iPhone using Tapatalk
Yeah I’ve tried heaps of different techniques! It might just not play well with CQ Lite. What are you using it on?
Sent from my iPhone using Tapatalk
-
Re: CP Essence Plus drying aid / topper?
One of my faves is elixr…I find it to be very slick, easy to apply, and it never streaks…I apply it quarterly over 303 graphene….
Bookmarks