-
Regular Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Desertnate
Yep. As I pull a new one out of the package I simply rip the tag off and move on. The tag comes out pretty cleanly.
Ditto, no issues.
Those who possess real knowledge are rare. Those who can set that knowledge into motion in the physical world are rarer still. The few who possess real knowledge and can set it into motion of their own hands are the rarest of all.
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Eldorado2k
I’ll have to try that sometime now that you say it’s fairly easy. I’ve always had a feeling that it might tear the edge off or leave a never ending thread loose on the corner that would eventually ruin the entire towel. It’s funny how we tend to worry about towels. Lol.
I still cringe everytime my PFM snags on a piece of trim. Lol.
Pull the tag down towards the MF at one end of the tag. Don’t pull away from MF and they come out fine.
Sent from my iPhone using Tapatalk
-
Re: Anyone using MF's from Sams Club?
Originally Posted by
Azure
Won't that make them shed bits of microfiber constantly creating another problem?
Nope, not for me they haven't. Like I said, when you cut them, a lot of little pieces come off. But wash them and they become like edgeless. I don't know why they pay to even have an edge put on them. None of the different towels I've purchased from Costco unravel at all.
But you don't have to go with my experience. They're cheap. Cut the edges off one and see what happens.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Coatingsarecrack
Pull the tag down towards the MF at one end of the tag. Don’t pull away from MF and they come out fine.
Sent from my iPhone using Tapatalk
Ok, I guess I’ll try both ways… But if 1 of your recommendations results in 1 of my microfibers getting ruined…. 1 of you’s is a dead man walking.lol. j/k
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Eldorado2k
Ok, I guess I’ll try both ways… But if 1 of your recommendations results in 1 of my microfibers getting ruined…. 1 of you’s is a dead man walking.
lol. j/k
Hardly ruined - you'll be one step closer to an Edgeless!
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
oneheadlite
Hardly ruined - you'll be one step closer to an Edgeless!
Yea, after I’m done snipping once, twice, wait there’s a loose thread here, another over there, nah it’s not perfect yet… And 4hrs. later I’m down to a nearly usable 4x4” towel.lol.
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Eldorado2k
Yea, after I’m done snipping once, twice, wait there’s a loose thread here, another over there, nah it’s not perfect yet… And 4hrs. later I’m down to a nearly usable 4x4” towel.
lol.
Lol… rag company makes the eaglet which is an 8x8 mf towel. I don’t know why I would want this over a 16x16 maybe wheels?
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Coatingsarecrack
Lol… rag company makes the eaglet which is an 8x8 mf towel. I don’t know why I would want this over a 16x16 maybe wheels?
Sent from my iPhone using Tapatalk
Chrome door handles. Lol
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Eldorado2k
Chrome door handles. Lol
Sent from my iPhone using Tapatalk
-
Super Member
Re: Anyone using MF's from Sams Club?
Originally Posted by
Coatingsarecrack
Lol… rag company makes the eaglet which is an 8x8 mf towel. I don’t know why I would want this over a 16x16 maybe wheels?
The chrome key surround on a 1978 ford
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
Bookmarks