-
Jescar and Sonax 2 stage…
Just getting started restoring Dads 2014 Mustang. Plan for Jescar Correcting Compound then Sonax Perfect Finish to prep for Gyeon Syncro. Someone with Jescar experience please tell me that these swirls are not too much for the Jescar with the Megs microfiber disc then Perfect Finish with Rupes yellow pad. Planning for test section this weekend. I planned on Gyeon compound and primer but read that they do not cut as well. Plus I have prior experience with the Jescar/Sonax combo.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Jescar and Sonax 2 stage…
Honestly I would start with a micro fiber pad and the Sonax perfect finish to cut. White is definitely always on the hard side but those year Mustangs are really nice to work with.
Ripping through your mind like a hurricane full of novocaine
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Jescar and Sonax 2 stage…
^^^^^ THIS ^^^^^
I second that suggestion because the swirls shown simply don’t look that bad and a test spot with Sonax and a Rupes yellow foam or even a Rupes yellow wool pad as a first try and as a last resort a MF pad might save you a bunch of clear coat
I have zero experience with the paint you are dealing with but I just finished correcting some horrible etchings on the hood of a 2020 Lexus whose paint was harder than I would have expected
I used the Jescar CC with Megs MF Cutting pad and Sonax PF with Rupes yellow foam
I tried a number of products and combinations before arriving at that pair
The Jescar cut the defects and everything else out with a 3 way section pass and the Sonax finished down nicely with a 4 way pass
There was almost no hazing or marring from the Jescar and on harder paint it would have been close to lsp ready
It’s a good combination just like some of the well know “pros” claim but it’s a pretty big gun that may not be needed
Sent from my iPhone using Tapatalk
-
Super Member
Re: Jescar and Sonax 2 stage…
I have used that combo plenty of times & I think you are on the right track-- I dont get much cut with perfect finish.
Try your test spots first - but I think your gonna need the Jescar
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Jescar and Sonax 2 stage…
Originally Posted by
luckydawg
I have used that combo plenty of times & I think you are on the right track-- I dont get much cut with perfect finish.
Try your test spots first - but I think your gonna need the Jescar
Yup
It’s a potent and awesome combination
There’s a reason it is so recommended
I just always feel the need to tell people to slow their roll and not assume it’s the best starting point
The OP did say he’s used it before so my apologies if I stepped on anyone’s toes
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Jescar and Sonax 2 stage…
Yea-- Im not big on micro fiber- been a foam pad guy myself , the discontinued rupes green pads were my favorite pad followed by the yellow.
The jesscar with the green followed by the yellow & perfect finish was a good combo for most of my paint corrections. Kind of warming up to the hybrid wool now that the rupes green is gone
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Jescar and Sonax 2 stage…
Originally Posted by
luckydawg
Yea-- Im not big on micro fiber- been a foam pad guy myself , the discontinued rupes green pads were my favorite pad followed by the yellow.
The jesscar with the green followed by the yellow & perfect finish was a good combo for most of my paint corrections. Kind of warming up to the hybrid wool now that the rupes green is gone
I got a Rupes yellow wool as a freebie with a purchase and was really hesitant to use it
Visions of wool pads and rotaries haunted me
Big mistake
Turned into one of my favorite pads
Never tried the Rupes blue wool but would probably order a few to try when my MF cutting pads are on their last legs
Sent from my iPhone using Tapatalk
-
Re: Jescar and Sonax 2 stage…
Thanks everyone! Will do test spot this weekend, now I’m anxious to see what the Sonax can accomplish on its own!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Jescar and Sonax 2 stage…
Reporting back. Test section done on 1 square foot section of hood. Within my skill set I just could not get by with just the Sonax/Rupes Yellow. Very pleased with the Jescar/Sonax combo though. Kinda expected this as prior experience on my Focus ST with same paint but less swirls came out great with same combo.
Sorry I just could not get decent pics, but I believe the results are above 90%ile. The ultimate test on this car will be the door mirrors, yikes! In person they look much worse.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Jescar and Sonax 2 stage…
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks