paint touchup tips

**Camineet** · 07-17-2021, 10:59 AM

Ah, so it is a concern. Good to know thanks.

**Rsurfer** · 07-17-2021, 01:37 PM

Originally Posted by Camineet

I'm thinking about going with a combo of the pencil eraser superglue approach and this 1inch kit. What do you guys think?

Amazon.com

Using a 1" sanding pad on a drill imo is not safe. Using the pencil method with high grit paper is a better way. I've used this method for years and it's the best method I've found for removing the least amount of clear coat around a chip.

**Camineet** · 07-17-2021, 01:40 PM

Oh yeah I wasn't going to use that crazy drill thing. Out of the question. I wanted this kit because it's got that nice handheld thing included.

**Rsurfer** · 07-17-2021, 03:03 PM

Originally Posted by Camineet

Oh yeah I wasn't going to use that crazy drill thing. Out of the question. I wanted this kit because it's got that nice handheld thing included.

Using the pencil method is more precise then using a 1" pad. I use a 1" Nano pad for finish polishing after wet sanding. Again, this method is for small rock chips..anything bigger, I would use a sanding block.