About to do my first ceramic coating.

[Jacob Harrod AUTOCLEAN]

Well I am about to do my 1st ceramic coating for a customer today.

I was wondering if I posted some pics up as I go through the process if you guys can take a look at my work so I can make sure I do a good job for the customer.

It's a one step correction and I'll be applying the BLACKFIRE Pro Ceramic Coating Black Edition.

Once I get to the application step I have timers available so I can set a timer for 45 seconds and then wipe the panel.

I'll be polishing with the Flex Beast, 8 Rupes yellow 7 inch CP pads, and the Pinnacle Advanced finishing Polish or the Sonax perfect finish. whatever I can get better results with.

I'm planning on an Iron decontamination step and then pulling it in to the shop for a rinseless wash or waterless wash with Sonax Glass Cleaner.

I have the Mother's Speed Clay 2.0 for the clay step.
Mothers Speed Clay 2.0 removes contaminants and improves gloss

Preferably a rinseless wash if Mike can answer my question over on his 1946 Dodge panel truck thread.

I didn't think about the rinseless wash option until this morning when I woke up and remembered about Mike's thread.

I just need the dilution ratio.

Sent from my SM-G975U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

Here's my polishes I have available.

I think I may have enough 3D One to get through the job if need be.

I'm hoping to get the best result with the Pinnacle Advanced Finishing Polish

Sent from my SM-G975U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

Wash towels clean and inspected

Sent from my SM-G975U using Autogeekonline mobile app

[Goonie75]

Hi. I was reading your post and since your are doing a chemical decontamination, the vehicle will get wet when you rinse the product off. Didnt catch what kind of vehicle.

It all depends on how much correction or polishing you want to get out of the project. I've had success with LC flat whites and One. Its a trade off sometimes since the pad isn't as smooth as say a black softer pad.

As for the coating. Take your time. Lots of rags. Soak them when finished. Good lighting to make sure all the high spots are gone.

Good luck. Just finished this C5 with One and ceramic.



Sent from my SM-G965U using Autogeekonline mobile app

[Desertnate]

One thing you don't mention is the panel prep? What are you using to get rid of the polishing oils before you apply the coating? Eraser, Prep, the Blackfire version...?

[Goonie75]

One thing you don't mention is the panel prep? What are you using to get rid of the polishing oils before you apply the coating? Eraser, Prep, the Blackfire version...?

This as well. Vital. Eraser Optimum Panel Prep, something.

Sent from my SM-G965U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

One thing you don't mention is the panel prep? What are you using to get rid of the polishing oils before you apply the coating? Eraser, Prep, the Blackfire version...?

I'm stripping with the Meguiar's Surface prep and then going over it again with the PBL Diamond Surface Prep Spray

Sent from my SM-G975U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

Hi. I was reading your post and since your are doing a chemical decontamination, the vehicle will get wet when you rinse the product off. Didnt catch what kind of vehicle.

It all depends on how much correction or polishing you want to get out of the project. I've had success with LC flat whites and One. Its a trade off sometimes since the pad isn't as smooth as say a black softer pad.

As for the coating. Take your time. Lots of rags. Soak them when finished. Good lighting to make sure all the high spots are gone.

Good luck. Just finished this C5 with One and ceramic.



Sent from my SM-G965U using Autogeekonline mobile app

Test spot dialed in in front of the customer.

It's a Volvo S60

3D One, Rupes Yellow CP pads, FLEX BEAST

Sent from my SM-G975U using Autogeekonline mobile app

[Goonie75]

Looks great good work. Don't forget the panel wipe and you're good.

Sent from my SM-G965U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

Looks great good work. Don't forget the panel wipe and you're good.

Sent from my SM-G965U using Autogeekonline mobile app

Thank you!!!! I won't forget!

Sent from my SM-G975U using Autogeekonline mobile app