-
Super Member
Coating single stage paint - should you?
I saw a post on a FB detailing group, where the poster said that he did a ceramic coating on single stage paint. Is this something you can/should do? I thought I'd remembered reading that you shouldn't.
-
Re: Coating single stage paint - should you?
New or modern single stage paint or old school single stage paint.
-
Super Member
Re: Coating single stage paint - should you?
Originally Posted by
Mike Phillips
New or modern single stage paint or old school single stage paint.
I guess I would call it new....looked to be on an early 2000's Chevy Truck
-
Super Member
Re: Coating single stage paint - should you?
New/modern day SS paint is good to go. You can run into 'streaking/patchy/blotchy' spots on some older/old school SS paint in my experience.
Scott Harle
Autodermatology
#autodermatology
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Coating single stage paint - should you?
Originally Posted by
Sizzle Chest
New/modern day SS paint is good to go. You can run into 'streaking/patchy/blotchy' spots on some older/old school SS paint in my experience.
Look no further for an answer.
-
Super Member
Re: Coating single stage paint - should you?
honestly on a 2000 truck like that, I would be more inclined to play with some megs #7, then polish it up and lay on nice quality sealant or a wax. it's not often I turn down coatings but on single stage I've seen paints respond very well to other products and it almost is a bit nostalgic to use non coating products.
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Super Member
Re: Coating single stage paint - should you?
Thanks everyone for your replies
-
Super Member
Coating single stage paint - should you?
From what I’ve found, Brian at Apex Detail mentioned (not demonstrated) using an acrylic polish, Xtreme Solutions LVR 403 or 404 and letting that cure 24-48 hours, that you could ceramic coat single stage paint.
I have a client who wants this done on an ‘84 Mercedes Benz. A conversation will be had, as I think some people might assume that a ceramic coating is permanent. After it wears down, what then? Polishing off the coating and back into the single stage paint on an old car...that’s out of my experience range.
-
Re: Coating single stage paint - should you?
Here's the actual deal...
If the coating you use requires you to use a panel wipe (solvent) to chemically strip the paint before applying the coating, with OLD single stage paint like solvent-evaporation lacquers and enamels - the act of chemically stripping this type of paint with a solvent can DULL the paint down.
If it's NEW old school type paint or NEW modern URETHANE single stage paint - no problems.
This question comes up from time to time. The first thing I do is what I did? Ask the TYPE of paint you're working on.
Condition is a factor too with old school paints. There's a difference between the ORIGINAL dried out paint on a 1952 Chevy and the single stage paint on a 1952 Chevy that was REPAINTED in 1978 and then maintained.
Clear as cloudy clearcoat?
-
Post Thanks / Like - 1 Thanks, 3 Likes, 0 Dislikes
-
Re: Coating single stage paint - should you?
Here's a coating detail did to a MODERN single stage URETHANE paint job 8 years ago.
Detailer’s Paint Coating on Single Stage Paint
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Dislikes
Bookmarks