-
2 step correction - 3D One x2 or 3D One + Gyeon Primer?
What do you guys think of a 2 step correction on a 2018 Nissan Rouge?
1st step - Test spot with 3D One with a 50/50 eurofiber, 2 slow passes. Take it from there.
2nd step - Finish off with 3D One or gyeon primer with a soft polishing pad or black pad.
-
Super Member
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
Hey noorth,
Here's what I would suggest because this is what I would do. Don't do two set passes and go. Do one pass at a time, wipe off after each with panel wipe and check results after each pass.
I would say do the trunk with this combo. Then try 3D One with a polishing pad on one side with the same process of one pass at a time, then do the same with gyeon primer with a soft polishing pad in the same process and then see which one you like better, which one gets you the best results, etc.
2016 Mazda 3 Sports GT
2015 Lexus IS250 F Sport
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
What's the paint damage look like?
What color?
Nissan paint is pretty soft & black Nissan paint is even softer.
Ripping through your mind like a hurricane full of novocaine
-
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
Originally Posted by
WillSports3
Hey noorth,
Here's what I would suggest because this is what I would do. Don't do two set passes and go. Do one pass at a time, wipe off after each with panel wipe and check results after each pass.
I would say do the trunk with this combo. Then try 3D One with a polishing pad on one side with the same process of one pass at a time, then do the same with gyeon primer with a soft polishing pad in the same process and then see which one you like better, which one gets you the best results, etc.
Makes sense. Very practical.
Thanks.
-
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
Its white.
The car has never been polished.
I'm a newbie so i don't know the level of damage. I will be inspecting it when i get home to my skill level lol
-
Super Member
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
TO be honest, I find myself sometimes overworking a product at times when for example, two or three passes would've cut already but I ended up doing 5 to 6 because I started introducing more marring than needed with loaded up clearcoat. So now, I test spot one pass at a time. Kevin Brown test spot method.
2016 Mazda 3 Sports GT
2015 Lexus IS250 F Sport
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
I’d do a test spot with 3D One with a polishing pad before any of those other two combos. It might be all you need to do.
Those euro fiber pads are ok but they will leave haze on soft paint.
-
Super Member
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
Originally Posted by
noorth
What do you guys think of a 2 step correction on a 2018 Nissan Rouge?
1st step - Test spot with 3D One with a 50/50 eurofiber, 2 slow passes. Take it from there.
2nd step - Finish off with 3D One or gyeon primer with a soft polishing pad or black pad.
What polisher are you using? Post a pic of the paint too. You might be able to get away with a 1 step with Just Primer. Nissan has just a tick above "soft" paint. Using a forced oscillation/rotation unit like a Flex or so will yield stellar correction with just a polish. Yes, I use primer as a 1 step with a light cutting pad such as an orange LC Pad or Yellow Rupes pad with great results. Skip a black pad, it has no cut. Use a yellow, green, white, (colors irrelevant really) depending on the system used. Use a light cutting or polishing pad with Primer. I have lots of examples in the Show-n-Shine area.
This Firebird Firehawk got a full correction with Primer only and the paint here was Medium to hard
This BMW M5 Got a 90-95% correction with Primer and an Orange Pad
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Re: 2 step correction - 3D One x2 or 3D One + Gyeon Primer?
Originally Posted by
TTQ B4U
What polisher are you using? Post a pic of the paint too. You might be able to get away with a 1 step with Just Primer. Nissan has just a tick above "soft" paint. Using a forced oscillation/rotation unit like a Flex or so will yield stellar correction with just a polish. Yes, I use primer as a 1 step with a light cutting pad such as an orange LC Pad or Yellow Rupes pad with great results. Skip a black pad, it has no cut. Use a yellow, green, white, (colors irrelevant really) depending on the system used. Use a light cutting or polishing pad with Primer. I have lots of examples in the Show-n-Shine area.
This Firebird Firehawk got a full correction with Primer only and the paint here was Medium to hard
This BMW M5 Got a 90-95% correction with Primer and an Orange Pad
Looks like i opened up pandora's box.
Yeah that's what i'll do, i'll get some pictures in a few days.
Thanks!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks