Dislikes: 0
-
Super Member
Dealing with Dust on "Garage Queen"
Hey guys, I have a truck that sits for long periods of time (months) in a finished workshop without being driven and there is a lot of dust that accumulates on it. The truck is black and I'm basically having to wash it every time I want to drive it because it looks like crap with all the dust on it. This has caused me to drive it even less than I normally would because I don't want to take the extra time and effort to wash it before going somewhere. To be honest I'm not entirely sure where all of the dust is coming from, but I'm thinking a lot of it might be coming from the relatively new concrete floor. It hasn't been sealed so I'm thinking some of the fine concrete particles on the surface are sloughing off. I've also been doing quite a bit of woodworking in the shop lately so I'm sure that has contributed to it as well.
Anyway, I'm looking for the best way to prevent and/or deal with the dust that doesn't involve washing the truck every time I want to drive it.
- I'm afraid that a cover would cause marring and scratches and would also be difficult to install/remove on a large truck. Anyone have experience using a cover on a crew cab truck?
- Do you think some type of canopy over the truck would help reduce the dust? I'm thinking this would prevent a lot of the dust from settling on the truck.
- Would backing it out and blowing the dust off regularly help? I wonder how often I would need to do this? When I blow the dust off after it has sat for long periods, there always seems to be a thin layer of dust that remains. I'm wondering if doing it more often would prevent this?
I appreciate any ideas you might have. TIA
Pictures attached are of truck after sitting since March.
-
Super Member
Re: Dealing with Dust on "Garage Queen"
Dust is going to happen in any structure. Imagine not dusting your house for months at a time?!?
Being that the truck sits inside, I would think a cover would be best. There is no wind or weather to blow the cover around (causing marring).
Other than that, maybe just take 10-15 minutes a couple times a week to use a QD or waterless wash on it.
It is no coincidence that man's best friend cannot talk.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Junior Member
Re: Dealing with Dust on "Garage Queen"
My truck sits in my shop as well and hasn't been used regularly due to having a take home vehicle from work. Any time you are using a saw, router, sander, etc. the fine dust is going to get airborne and settle on your truck. I would back mine outside of the shop whenever I needed to work on something and close the garage door.
If your keeping the truck up with a wax/sealant/coating you could rinse it off to remove the dust and blow dry with a leaf blower to avoid taking the time to dry it and potentially instilling swirl marks. Weekly or bi-weekly detailing with a WW or RW would help if you don't let it get really dusty. If you start rubbing that dust into the clear coat you'll have problems.
Those photos of your truck look like the table tops in my shop after sanding solid surface countertops. I would use my electric leaf blower with 230 mph wind speed to blow all the dust out the doors then vacuum the benches and floor to remove the nuisance dust. It still required periodic wet mopping to keep the shop clean.
A car cover may work but I would pull the truck outside when your working in the shop and keep it covered while outside.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Dealing with Dust on "Garage Queen"
Not sure what you want us to tell you here? Might sound rude, but if looking for a cheap solution, go to any thrift shop, and go buy yourself 3 or 4 cheapo bed sheets, and cover the truck. There's no magic pill here to swallow.
That's a black truck? Hell, it looks like it met Mt. St. Helens when it erupted!
A Car Cover, sure, but then you got the problem of that being filthy, and who wants to deal with that?
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Dealing with Dust on "Garage Queen"
The only thing you can do as a long term solution is change where you park it when you're working. The reason is, a lot of these concrete type materials can get quite high in the ph scale when any moisture is introduced so you're doing a lot more damage to the clearcoat than just cosmetic.
2016 Mazda 3 Sports GT
2015 Lexus IS250 F Sport
-
Re: Dealing with Dust on "Garage Queen"
Maybe take sheet wrap body shops use to cover vehicles and keep it covered up. If not exposed to wind and weather and truly just need to keep the dust off that should work without worry about scratching. You can pick one up for less then 20 bucks.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Dealing with Dust on "Garage Queen"
I have one of my cars covered zipped inside a Car Bag. I never have to worry about dust. Also, my garage floor is painted, which I noticed cuts down on dust.
Treat it like it's the only one in the world.
-
Super Member
Re: Dealing with Dust on "Garage Queen"
IMO:
This is a scenario where a car/truck
“capsule” is a sure-fire remedy.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Dealing with Dust on "Garage Queen"
Originally Posted by MarkD51
Not sure what you want us to tell you here? Might sound rude, but if looking for a cheap solution, go to any thrift shop, and go buy yourself 3 or 4 cheapo bed sheets, and cover the truck. There's no magic pill here to swallow.
That's a black truck? Hell, it looks like it met Mt. St. Helens when it erupted!
A Car Cover, sure, but then you got the problem of that being filthy, and who wants to deal with that?
Yep that’s a black truck under there.
Not necessarily looking for a cheap solution and certainly not looking for a magic pill. Just wanted to get others’ ideas about what might work or not work to help reduce the amount of dust on the truck. I had thought about bed sheets also, but from past experience on snowmobiles, some dust always manages to get through the sheet.
If a car cover can be installed and removed without too much risk of scratching, I may look into going that route. A filthy cover would be better than a filthy truck.
-
Super Member
Re: Dealing with Dust on "Garage Queen"
A lot of good ideas and feedback guys, I really appreciate it. I have a small pop up style canopy that will cover part of the truck. I may try this just to see what it does. I’m thinking this should prevent a lot of the dust from settling on the truck as it would have to blow up under the canopy.
Bill D, where does one buy a car bag and approx how much does one cost? I’m going to look into sealing the concrete floor as I think this is the origin of a lot of the dust.
Similar Threads
-
By denns1989 in forum Show N' Shine
Replies: 25
Last Post: 01-15-2018, 08:22 AM
-
By RyanPaul in forum Ask your detailing questions!
Replies: 55
Last Post: 04-25-2015, 11:31 AM
-
By camaroz06 in forum Auto Detailing 101
Replies: 7
Last Post: 08-27-2014, 12:45 AM
-
By paradigmGT in forum Auto Detailing 101
Replies: 8
Last Post: 03-17-2014, 02:07 PM
-
By Lexi65 in forum Auto Detailing 101
Replies: 9
Last Post: 01-03-2014, 10:22 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks