-
Super Member
-
Super Member
Re: Coating experts: I need your opinions here
Man I feel bad right now... This dude asked for advice and when I chimed in we immediately clicked and he was listening to the advice I was providing and he seems like a cool dude and now I feel somewhat responsible for this strange outcome on his car...
-
Super Member
Re: Coating experts: I need your opinions here
My gut tells me it could possibly be a bad batch? I’m gonna tell him to call Megs on the 1-800 # on the label and maybe they can help.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Regular Member
Re: Coating experts: I need your opinions here
Perhaps a wash with Reset?
-
Super Member
Re: Coating experts: I need your opinions here
B4 you call Megs, I would....
1: make sure it’s hyper wash and not hyper dressing
2: check for a contaminated wash media(Try a new one)
3: check for a contaminated drying media.(try a different towel)
4: make sure product isn’t being over used.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Coating experts: I need your opinions here
Originally Posted by
Dr Oldz
B4 you call Megs, I would....
1: make sure it’s hyper wash and not hyper dressing
2: check for a contaminated wash media(Try a new one)
3: check for a contaminated drying media.(try a different towel)
4: make sure product isn’t being over used.
It’s Hyper Wash. He posted a picture of the brand new bottle.
He also posted pictures of some brand new microfiber towels he purchased from the Rag Co. which he intended to use to dry the car.
I gave him specific instructions on how and even when to add 1oz. of Hyper Wash to his wash bucket.
I’m willing to bet those aren’t the possible causes at this point. But I appreciate any and all posts/opinions.
-
Super Member
Re: Coating experts: I need your opinions here
Originally Posted by
Epilogts
Perhaps a wash with Reset?
Odd, that I myself also had a similar problem like this, and it was with CP Reset.
And I initially thought the same thing too, thought I used a bit too much of Reset, and the second time I used it, I used much less paying critical attention to mix ratios. And yep, same end results again, a film all over my CQ UK'd Truck.
This then might be something else that causes such, I just don't know?
Anyway, the good news is, a follow up with a good Topper Spray that's designed to work with the Ceramic Coatings should be able to rectify this issue lickety split.
-
Super Member
Re: Coating experts: I need your opinions here
Originally Posted by
MarkD51
Odd, that I myself also had a similar problem like this, and it was with CP Reset.
And I initially thought the same thing too, thought I used a bit too much of Reset, and the second time I used it, I used much less paying critical attention to mix ratios. And yep, same end results again, a film all over my CQ UK'd Truck.
This then might be something else that causes such, I just don't know?
Anyway, the good news is, a follow up with a good Topper Spray that's designed to work with the Ceramic Coatings should be able to rectify this issue lickety split.
What did the issue appear to be? When looked at in person with your own eyes? Was it streaking? How would you technically define what happened in your case?
-
Super Member
Re: Coating experts: I need your opinions here
I wonder if he's rinsing properly. Could be using a power washer that puts out the pressure but very low volume of water and not really rinsing it all. Because of the pressure he thinks it's rinsed enough. Just a thought. Never seen this happen before.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Coating experts: I need your opinions here
And if you don’t mind me asking, what specific topper spray did you use to fix the situation?
Bookmarks