Which lc flats to get

[jarabian52]

I'm about to pull the trigger on some pads and polisher and 3d speed. What color pads should I get for my dodge charger, Iv'e heard paint is soft on these cars but not sure. Also wondering if I should just get 3d one instead because I want to add turtlewax at the end. But I want to work with something lightly abrasive for my first polish.

[WillSports3]

Orange and white basically. Orange has medium cut and is good for all around. White is polishing pad, very very little cut. Whether 3D or LC, both have good pads. Whether or not you want to add turtlewax doesn't really matter on what pad you're gonna use since that's just on the polishing stage only.

[PaulMys]

If you want to do any correcting beyond very light marring/swirls with the Speed, you'll most likely need the orange pads.

But, only a test spot can tell you that for certain.

[jarabian52]

Should I Just get 3 orange and 3 whites?

[WillSports3]

The safest number to get is probably at least 8 of each.

[PaulMys]

Should I Just get 3 orange and 3 whites?

I would.

Then, after you do your test spot, get at least 3 more of the pad you find works the best.

You don't want to just have 3 pads for a whole car. They will load up with product, heat up & and stop cutting, and fail prematurely.

[jarabian52]

Yeah of course. So lets say when the 6 come in and white works the best. Can I use those 3 for the whole car? then order more for next time.

[PaulMys]

Yeah of course. So lets say when the 6 come in and white works the best. Can I use those 3 for the whole car? then order more for next time.

I wouldn't, personally.

But, if you clean them on the fly with a terry cloth towel, you might get away with it.

[jarabian52]

Should I get a pad conditioner at all for priming the new pads? what would be the best process? And should I get a pad brush as well?

[PaulMys]

A brush is a must IMO.

I don't use pad conditioners. Why saturate the pad before you even start?