Multi layer ceramic coating: ok to IPA wipe in between applying layers?

[Banegio]

I am concerned with the dust level in the garage.

Using Gyeon Syncro as example, if I am going to split coating the Mohs layers and the Skin layer into two days, is it ok to do a IPA wipe in-between coating the layers?

[The Guz]

No it is not recommended. It can affect the coatings curing process.

By the way welcome to AGO.

[Banegio]

Thanks, Guess I will aim to get everything done in the same day.

Thank you

[Rmd]

Or do Mohs and skin on one or more panels at a time, rather than Mohs on whole car then skin on whole car. That way if you don’t get it all done in one day, you can get the rest of the it the next day.

[The Guz]

See if you can find a post from forum member zmcgovern45. He talked about taking a plush towel and skimming it over the surface to pick up dust.

Unfortunately it still takes time to apply Syncro and the panel by panel is going to take longer than going around the entire vehicle. 1 hour in between layers of Mohs with a max of 3 layer. Assume it takes 1 hour to apply 1 layer of Mohs you are looking at 5 hours with the included 1 hour wait time between coats (max 3 layers). Then waiting another 4 hours to apply 1 layer of Skin which is the minimum recommended time. So roughly 9 hours to just to apply syncro. Although 2 layers of Mohs is more than enough.

Do you already own Syncro?

[Banegio]

Or do Mohs and skin on one or more panels at a time, rather than Mohs on whole car then skin on whole car. That way if you don’t get it all done in one day, you can get the rest of the it the next day.

Thanks for the suggestion. Seriously considering it.

See if you can find a post from forum member zmcgovern45. He talked about taking a plush towel and skimming it over the surface to pick up dust.

Not hitting with the right keywords

Unfortunately it still takes time to apply Syncro and the panel by panel is going to take longer than going around the entire vehicle. 1 hour in between layers of Mohs with a max of 3 layer. Assume it takes 1 hour to apply 1 layer of Mohs you are looking at 5 hours with the included 1 hour wait time between coats (max 3 layers). Then waiting another 4 hours to apply 1 layer of Skin which is the minimum recommended time. So roughly 9 hours to just to apply syncro. Although 2 layers of Mohs is more than enough.

Do you already own Syncro?

I am more than happy to take the time on applying the coatings, to get the most out of the prep work, which is most of the effort imo.

Just got the Syncro delivered.

[C5Longhorn]

Griot's sold disposable car covers. They were very thin plastic covers to keep dust off cars. That may be an option at the end of Day 1 as I believe they are really light weight.

Sent from my Pixel 3 XL using Tapatalk