Dislikes: 0
-
03-02-2019, 07:36 AM
#171
Re: Mother’s CMX is here!
Originally Posted by Klasse Act
IIRC I went with 2 oz for 4 gallons. The product is so thick that it works out pretty good like this. I make extra so I can pre-treat to a level I feel comfortable and not worry about shorting myself during the cleaning. I've done both the GD method as well as Aqua sponge with great success. Some people might also go higher to be even safer and that's fine too, doesn't hurt but don't go to high of a ratio, the product goes a long way!
Hmm, I thought this stuff was 1oz/gallon for rinseless, I think that's the way I used it, I've only gotten to use it once or twice though.
-
03-02-2019, 10:15 AM
#172
Super Member
Re: Mother’s CMX is here!
Originally Posted by Coatingsarecrack
...yet the overcoat still calls.
Sent from my iPhone using Tapatalk
PM me your address and I'll send you a 75% full bottle if ya want. It's the 'original' not the V2 but still good stuff.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
03-02-2019, 02:25 PM
#173
Super Member
Re: Mother’s CMX is here!
Originally Posted by rlmccarty2000
Today I washed (with Reset) the panel I used CMX on about 21 days ago. The beading was not great and the dirt rejection properties were pretty much gone. I’ll continue to use CMX as a topper, but as a stand-alone coating it was lacking. CMX is better than many of the toppers on the market, especially at the price point, but IGL Premier and Kamikaze Overcoat are still the only two toppers I have used that stand up 24/7 3+ month torture.
On glass the beading was gone, no idea why.
Oh wow that's not good.
Mine seems to be doing ok, but has not seen any rain or snow recently. I may just do a quick touchless car wash to see how it does. Its been 2 weeks and last rain it saw it performed well.
I hate running my comparison test because I love washing with Ech2o!
-
03-02-2019, 02:27 PM
#174
Super Member
Re: Mother’s CMX is here!
Originally Posted by heloguy
I just finished up wiping my Harley down with Ech2o. I got it last night, and I wanted to use it on my truck, but it’s been raining off and on all day.
So I went into the garage and wiped down my bike with it. It was filthy from the last ride, and had fingerprints all over it from changing out my heated grips for new ones.
I must say, I’m impressed with the way it turned out.
I’ve always sworn by BugSlide when it comes to the bike. It’s been my go to for a few years now, but I think I like the Ech2o better.
It’s a little more labor intensive, but it looks fantastic!
Sent from my iPhone using Tapatalk
Looks great I'm glad you like it! It's very versatile and can be used as a great QD as well.
Originally Posted by acuRAS82
Ech2o RW ratio, anyone? I don’t feel like searching... if possible.
From Carpros website
500ml makes up to 2 Gallons of (1:15) Waterless Spray500ml makes up to 3 1/4 Gallons of Quick Detailer (1:25)500ml makes up to 5 1/4 Gallons of Clay Lubricant (1:40)500ml makes up to 26 1/2 Gallons of Rinse-less Wash (1:200)
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
03-02-2019, 02:37 PM
#175
Super Member
Re: Mother’s CMX is here!
Originally Posted by rlmccarty2000
IGL Premier and Kamikaze Overcoat are still the only two toppers I have used that stand up 24/7 3+ month torture.
And TAC Moonlight, PA Cosmic and Viking were somewhat close behind, correct?
-
03-02-2019, 02:53 PM
#176
Super Member
Re: Mother’s CMX is here!
Moonlight is AWESOME
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
03-02-2019, 08:09 PM
#177
Super Member
Re: Mother’s CMX is here!
Originally Posted by acuRAS82
And TAC Moonlight, PA Cosmic and Viking were somewhat close behind, correct?
Yep correct. TAC Moonlight and Overcoat, then Premier, Cosmic, Viking. Overcoat may be better than Moonlight. I need to run them side by side one day. Premier sheds dirt the best of any of them. If Overcoat was half the price it is I would throw all my others away (maybe, lol). Overcoat is for black tie occasions only. Thanks again Budget.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
03-02-2019, 09:02 PM
#178
Super Member
Re: Mother’s CMX is here!
Thanks! Those 5 remain the only ones in my ‘coating lite’ list (besides CanCoat). I’ve tentatively moved CMX out. New post to document my SiO2 Sprays and Coating Lites is coming soon to Autopia.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
03-17-2019, 02:26 PM
#179
Super Member
Re: Mother’s CMX is here!
Can anyone save me time, whats the consensus on this, CMX that is?
-
03-17-2019, 02:38 PM
#180
Super Member
Re: Mother’s CMX is here!
Originally Posted by MrOneEyedBoh
Can anyone save me time, whats the consensus on this, CMX that is?
See link in my sig.
Similar Threads
-
By conman1395 in forum Ask your detailing questions!
Replies: 5
Last Post: 08-03-2015, 09:05 AM
-
By oldmodman in forum Auto Detailing 101
Replies: 7
Last Post: 05-12-2015, 11:46 PM
-
By CEE DOG in forum Off-Topic
Replies: 69
Last Post: 02-11-2012, 10:52 PM
-
By 09I30cw in forum Auto Detailing 101
Replies: 2
Last Post: 06-30-2010, 07:51 AM
-
By termigator in forum Products Guides
Replies: 3
Last Post: 04-17-2010, 03:36 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks