-
Removing residue from previous tire balancing weights?
I assume most places these days use the stick-on weights on the wheel barrel to balance tires. When they remove the old weights, they always leave some adhesive behind. How do you all address this? I’ve tried Goo Gone and similar products and scraping with some wooden or plastic scraper, but I never am able to get it all off and usually manage to leave some scrapes. This is while leaving the wheels on the car.
Is there a way to remove the crud without taking the wheels off? I am not a shade tree/garage mechanic so I’m worried that I might not reinstall the wheels back correctly.
-
Super Member
Re: Removing residue from previous tire balancing weights?
Originally Posted by
hooked
Is there a way to remove the crud
without taking the wheels off?
If you can get your hand, and a cloth,
back in where the cruddy old adhesive
residue is...I’ll suggest applying some
3M General Purpose Adhesive Cleaner
to the cloth; and, then (gently) manually
wipe off the remaining adhesive/crud.
{Immediately afterwards:
Washing the wheel with your favorite car
wash shampoo would be advisable, IMO.}
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Removing residue from previous tire balancing weights?
-
Super Member
Re: Removing residue from previous tire balancing weights?
Mineral Spirits along with a wooden or plastic scraper always works for me.
-
Re: Removing residue from previous tire balancing weights?
What Bob said... Also, letting the product dwell is also very helpful. GooGone isn't a spray and wipe. Letting it dwell for 5 minutes or so gives it time to break apart the glue.
-
Super Member
Re: Removing residue from previous tire balancing weights?
I just used a 3m eraser wheel for he first time on some emblem adhesive after debadging. It worked amazing and this is my plan next time I have wheel weight residue to remove, even though I haven’t actually tried it yet.
Sent from my iPad using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Removing residue from previous tire balancing weights?
I had to do this earlier this year. Goo Gone and plastic razor blades worked for me. Let the Goo Gone dwell.
Treat it like it's the only one in the world.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Removing residue from previous tire balancing weights?
Originally Posted by
Eric@CherryOnTop
I just used a 3m eraser wheel for he first time on some emblem adhesive after debadging. It worked amazing and this is my plan next time I have wheel weight residue to remove, even though I haven’t actually tried it yet.
The issue I had was that when the previous weights were removed, there was foam stuck the to wheel, not just adhesive. So when I applied the goo gone or whatever solvent, it never made it to the adhesive to dissolve it. I tried scoring the blobs to create areas where the solvent could get past the foam, but was never fully successful. I’ll give it another go with the suggestions everyone made. Thanks all.
-
Super Member
Re: Removing residue from previous tire balancing weights?
What Funx650 (Bob) wrote.
If it's adhesive of almost any kind the 3m makes short work of it.,,,I also like to use it remove those little round mirrors people put on their door mirrors,,stuff a rag between the mirror and the housing,squirt some directly on foam part of the sticky thing and go do something else for a bit,,sometimes they even fall off.
“I have trouble with names and faces, but I never forget a car.”
Bookmarks