-
Super Member
Who is excited to get M110/210?
I remember when 105/205 came out and they were truly ground breaking. For years it seemed 105 was the compound that all other compounds got compared to. Then other companies caught up and then surpassed it with user friendly products that cut and finished as well or better. 205 always worked great for me except there was a learning curve with it and it isn’t my choice for softer paints.
110/210 are long overdue IMO but I’m sure the wait was because Meg’s wanted to put a combo out that really solves all the 105/205 issues.
They both sound great and hopefully my bottles will be in by the weekend so I can give them a try.
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
Nice and all, but with so many great products already out on the market, kind of hard to get excited for these.
I'll have to run out of my current stock before getting something new. OR get a sample for free or whatever. Too much stuff on my shelves.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
I suppose you can say that I’m excited, but more so just curious if they are able to set the bar again.
Sent from my iPhone using AGOnline
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
Originally Posted by
Dan Tran
I suppose you can say that I’m excited, but more so just curious if they are able to set the bar again.
Sent from my iPhone using AGOnline
Same here.
I've been a long time fan of Meguiar's. They were the first products I used back in the late 90's. I suppose a lot of nostalgia plays a part in my loyalty.
So I am definitely curious.
As of today, I'm really digging 3D One.
If 110, and 210 solve the dusting/finishing issues, I may return megs to the forefront.
As of today, excessive dust is my arch nemesis.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
Originally Posted by
dlc95
As of today, excessive dust is my arch nemesis.
I couldn't agree more. It's one reason I don't even have 105 on hand anymore.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
Originally Posted by
Dr Oldz
I couldn't agree more. It's one reason I don't even have 105 on hand anymore.
Neither do I!
I'd rather use a lesser cutting compound, and hit it twice if I absolutely need to.
If the abrasives have powdered away, they're no longer in service cutting paint.
-
Super Member
Re: Who is excited to get M110/210?
Originally Posted by
dlc95
Neither do I!
I'd rather use a lesser cutting compound, and hit it twice if I absolutely need to.
If the abrasives have powdered away, they're no longer in service cutting paint.
I have found Sonax CutMax and Wizards Mystic Compound and have no need to hit it twice.
-
Re: Who is excited to get M110/210?
I am definitely interested. I agree these are long overdue.
-
Super Member
Re: Who is excited to get M110/210?
Cautiously optimistic. I like D300 for use with microfiber pads. Is 110 a replacement for D300? Or is 110 for foam pad cutting? I’ll probably get a few small bottles to try out, but I just bought ONE and haven’t had time to test it yet. Too many good options for compounds and polishes today. I’ve heard Menzerma is reformulating some polishes too.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Who is excited to get M110/210?
Originally Posted by
rlmccarty2000
Cautiously optimistic. I like D300 for use with microfiber pads. Is 110 a replacement for D300? Or is 110 for foam pad cutting? I’ll probably get a few small bottles to try out, but I just bought ONE and haven’t had time to test it yet. Too many good options for compounds and polishes today. I’ve heard Menzerma is reformulating some polishes too.
I believe 110 is positioned as a "premium universal" compound, much like M105 was back in 07.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks