What did you do today, in regards to detailing?

**ClearVue18** · 04-28-2019, 03:54 PM

Yes with that lifetime warranty everything should be covered. Just give them a call

Sent from my SM-N960U using Autogeekonline mobile app

**Klasse Act** · 04-28-2019, 04:15 PM

Speaking of Griot's Garage I did get down to the garage to remove this mark on my p/s fender that I would describe best as something rubber rubbed against it. I knew the GG3 and a yellow foam pad, combined with 303 Polish would take care of it and it did. I ended up doing half the fender actually and sealed it with CMX so it has something on it.

While I was down there I applied a single coat of Adam's Tire Armor, can't hurt as this week we're supposed to get alot of rain, better than the inches of snow we got yesterday...snow on April 27th, how stupid

What did you do today, in regards to detailing?

Sent from my SM-G950U using Tapatalk

**ClearVue18** · 04-28-2019, 04:22 PM

Originally Posted by Klasse Act

Speaking of Griot's Garage I did get down to the garage to remove this mark on my p/s fender that I would describe best as something rubber rubbed against it. I knew the GG3 and a yellow foam pad, combined with 303 Polish would take care of it and it did. I ended up doing half the fender actually and sealed it with CMX so it has something on it.

While I was down there I applied a single coat of Adam's Tire Armor, can't hurt as this week we're supposed to get alot of rain, better than the inches of snow we got yesterday...snow on April 27th, how stupid

Sent from my SM-G950U using Tapatalk

How long did it take you?

Sent from my SM-N960U using Autogeekonline mobile app

**Klasse Act** · 04-28-2019, 04:27 PM

Originally Posted by ClearVue18

How long did it take you?

Sent from my SM-N960U using Autogeekonline mobile app

Well, it took about 5 minutes to take out the mark, it wasn't anything major. Being I used the GG3 you can't put down too much pressure but it wasn't needed for this little fix, this little machine always does what I ask of it, just have to know what your trying to accomplish with it. Probably took about as long to apply CMX, let it sit and wipe off if I'm honest.

Sent from my SM-G950U using Tapatalk

**bfielder32087** · 04-28-2019, 05:01 PM

First wash this afternoon after IGL Premier was applied on Wednesday.

Sent from my SM-G950U using Autogeekonline mobile app

**Klasse Act** · 04-28-2019, 05:21 PM

Originally Posted by bfielder32087

First wash this afternoon after IGL Premier was applied on Wednesday.

Sent from my SM-G950U using Autogeekonline mobile app

How was IGL Premier? I have a full bottle and haven't gotten around to using it yet? Did you notice an increase in Gloss? How was the beading or did it sheet?

Sent from my SM-G950U using Tapatalk

**ClearVue18** · 04-28-2019, 06:06 PM

Originally Posted by Klasse Act

Well, it took about 5 minutes to take out the mark, it wasn't anything major. Being I used the GG3 you can't put down too much pressure but it wasn't needed for this little fix, this little machine always does what I ask of it, just have to know what your trying to accomplish with it. Probably took about as long to apply CMX, let it sit and wipe off if I'm honest.

Sent from my SM-G950U using Tapatalk

Sent from my SM-N960U using Autogeekonline mobile app

**bfielder32087** · 04-28-2019, 07:11 PM

Originally Posted by Klasse Act

How was IGL Premier? I have a full bottle and haven't gotten around to using it yet? Did you notice an increase in Gloss? How was the beading or did it sheet?

Sent from my SM-G950U using Tapatalk

Pretty good. Application was easy, initial buff was a bit grabby which surprised me. Secondary buff was smooth. Very tight beading. I don't know if I'd say sheeting per day but a lot of the beads were rolling off the panel. Which I didn't experience before when using the powerlock/845 combo. As far as gloss I'm not sure. Definitely glossy but I don't know if I see a difference between powerlock/845 and Premier.

Sent from my SM-G950U using Autogeekonline mobile app

**DETAILROOKIE** · 04-28-2019, 09:07 PM

Tried Griots Garage Spray Wax today and it is a pretty solid product! It streaked a little bit, but could have been user error since it was hotter than usual and I didnt allow the paint to fully cool off. Does add some gloss!!

Sent from my SM-N960U using Autogeekonline mobile app

**Klasse Act** · 04-28-2019, 09:09 PM

Originally Posted by DETAILROOKIE

Tried Griots Garage Spray Wax today and it is a pretty solid product! It streaked a little bit, but could have been user error since it was hotter than usual and I didnt allow the paint to fully cool off. Does add some gloss!!

Sent from my SM-N960U using Autogeekonline mobile app

Yeah you want a cool panel for sure with it, have you ever tried Best of Show Detailer, an absolute sleeper product