What did you do today, in regards to detailing?

[Prange]

Used my IK Pro Foamer filled with Frothe for a waterless wash. I sprayed it on a towel to clean the wheels. Used Nextzett Cockpit Premium for a quick touch-up on the interior, including the mats.

[Big Dave]

I decided it was time to clean up the engine bay of the Qashqai, I sprayed it with Bowden's Orange Agent, brushed all the nooks and crannies, then rinsed off. Dried it off with my Bigboi, which is excellent for engine bays, then coated all the black plastics liberally with Meg's Hyper Dressing and wiped the excess off.

I was just going to QD the overspray from the rinse off, but there was more than expected, and the wheels needed attention too, so I went with a full wash. Wheels were cleaned with Bowden's Wheely Clean then sealed with 303 Touchless Sealant. Then washed everything else with Reset, rinsed, and dried using TWHS Ceramic Wet Wax.

Sent from my motorola edge 20 fusion using Tapatalk

[Coatingsarecrack]

Never even heard of that stuff, results speak for themself

Sent from my SM-G991U using Tapatalk

Polish angel was originally known for their night end Carnauba wax.

Wanna use wax on the chevelle but don’t like the effort anymore.


Sent from my iPhone using Tapatalk

[Coatingsarecrack]

Frustrating but thankfully they back their warranty. I even posted about a bad foam gun from them in a review and they fixed it without issue. In fact, I made a dumb error in the return process and they still made it right pretty quickly.

Hopefully they get you sorted quickly to finish the other 2/3!

Sent from my SM-F936U1 using Tapatalk

That’s why I went with a g15 over a Rupes. There 30 mins away and will swap out over the counter.


Sent from my iPhone using Tapatalk

[Coatingsarecrack]

Used my IK Pro Foamer filled with Frothe for a waterless wash. I sprayed it on a towel to clean the wheels. Used Nextzett Cockpit Premium for a quick touch-up on the interior, including the mats.

Pro foam 2 or 12. I keep wanting to get a 12 for Frothe.


Sent from my iPhone using Tapatalk

[Klasse Act]

So I did a pollen maintenance wash on the Cruze and the EN. This time around I used Veros Ceramic Wash in my Griot's Garage foam gun. Now it's a high suds formula so I went with 2 oz and it worked great, next time around I'll try 1 oz, that's what I use for DIY Detail Incredible Suds. This is a color changing formula and looked like anti-freeze when on the ground. I let it dwell for a couple minutes and rinsed away, made great beads on my g/f's Cruze, a given on the EN.

When I was done I decided to apply some Sonax Ultra Slick Detailer to the cars, well I intended to apply it to my g/f's Cruze but you know what, that DAMN pollen was already all over her car, so I just applied it to the EN. The problem with having so many spray waxes/detailers is you forget some sometimes! This stuff is truely S L I C K, the gloss & sickness will be under all that yellow sh!t and sap dots

Sent from my SM-G991U using Tapatalk

[craigdt]

Grinding my 400sq ft 2 car garage floor, in preparation for a 3 layer epoxy system.

By hand. With an angle grinder.



Edit:
this is what it looked like at first.
70 years old.

[Prange]

Pro foam 2 or 12. I keep wanting to get a 12 for Frothe.


Sent from my iPhone using Tapatalk

Oops! It's the 12.

[MisterSnoop]

Had time for my car today. RW and some Griot's ceramic tire dressing on the tires.

[Tasmania]

I decided it was time to clean up the engine bay of the Qashqai, I sprayed it with Bowden's Orange Agent, brushed all the nooks and crannies, then rinsed off. Dried it off with my Bigboi, which is excellent for engine bays, then coated all the black plastics liberally with Meg's Hyper Dressing and wiped the excess off.

I was just going to QD the overspray from the rinse off, but there was more than expected, and the wheels needed attention too, so I went with a full wash. Wheels were cleaned with Bowden's Wheely Clean then sealed with 303 Touchless Sealant. Then washed everything else with Reset, rinsed, and dried using TWHS Ceramic Wet Wax.

Sent from my motorola edge 20 fusion using Tapatalk

Nice one Dave! Looking slick and the engine bay too