-
Super Member
Rinseless and waterless
Today I started doing a waterless with my solution of Ech2o in a pump sprayer. I did most of the cab that way and it seemed like I was getting too much overspray causing extra work. I had a bucket of ONR already mixed with towels already soaking. I did the truck bed with the ONR and it just seemed quicker and maybe easier. Just wondering about various opinions on this. Both turned out great, i just think i may prefer rinseless.
Sent from my SM-G955U using Tapatalk
-
Re: Rinseless and waterless
Try rinseless with Ech2o at 1oz. per gallon. I do not use waterless unless forced to when traveling. I like the extra wetness of rinseless.
-
Super Member
Re: Rinseless and waterless
Originally Posted by
joleyred
Today I started doing a waterless...
I did most of the cab that way and
it seemed like I was getting too much
overspray causing extra work.
I did the truck bed with the ONR
and it just seemed quicker and
maybe easier.
Both turned out great, i just think i
may prefer rinseless.
There apppears to be many versions of
RWs’/WWs’ “HOW-TOs”...including what
I refer to as hybrid versions (the ones
that I prefer).
•As far as that goes; and, IMO:
-There aren’t any wrong versions.
-Use whichever version that you
have determined best meets your
expectations for vehicle cleanliness.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Rinseless and waterless
Originally Posted by
FUNX650
There apppears to be many versions of
RWs’/WWs’ “HOW-TOs”...including what
I refer to as hybrid versions (the ones
that I prefer).
•As far as that goes; and, IMO:
-There aren’t any wrong versions.
-Use whichever version that you
have determined best meets your
expectations for vehicle cleanliness.
Bob
What is your preferred "hybrid" method?
Sent from my SM-G955U using Tapatalk
-
Super Member
Re: Rinseless and waterless
Originally Posted by
joleyred
What is your preferred "hybrid" method?
Similar to what you posted.
With a caveat, or two.
1.)
After first spraying-down a panel, I then
go over the same panel with “the towel
that’s been soaking in a bucket”. (Note:
for a better helpmate, I adjust the spray
nozzle to a ”non-overspraying pattern”.)
2.)
Meguiar’s D114, used at the 1:128 dilution
ratio for both applications, makes this version
a breeze (for me).
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
Bookmarks