Thanks: 0
Dislikes: 0
-
Paint protection....what is the best option?
I am awaiting the arrival of my new lightning blue super crew f150. I am trying to determine what is my best option for paint protection.
I am not one to wax every couple of months, but am not opposed to doing something say once a year. Professionally installed ceramic coating seems like it is the best (However expensive) option. A five year coating runs about $1000. It seems like a lot to spend.
What other options may be a good route to go? Is there something that can be applied by an amateur that will hold up for a reasonable period of time?
-
Super Member
Re: Paint protection....what is the best option?
Is length of duration and price your only concern? I mean the protection offered by a wax is inferior to the one offered by a sealant which in turn is inferior to a coating and nothing compares to paint protection film - especially the price.
The first 3 are doable by the customer, you don't need a multi-year ceramic coating, it's just not worth it. Lots of good consumer grade coatings that will give you 2 year protection and not break the bank. They're also not hard to apply.
If you really want to keep costs low but get good protection, go for Jescar Powerlock+ which is a great sealant. But if your new truck needs some correction (very likely) then maybe a light polish with sealant in it - like McKee's 37 360 - is a good choice.
-
Super Member
Re: Paint protection....what is the best option?
Are you willing to do the work yourself?
If you are doing the work yourself, there are lots of sealants which will last roughly six months. You can do a coating yourself which will last two years for less that $200 for all the prouducts needed to do the job, not including the price of a DA and pads.
From my experience I wouldn't want to go five years without re-doing the protection on a vehicle. After 18~24 months, the paint really needs to be cleaned and on a daily driver there will be a few swirls or other marks which can be polished away too in order to restore everything to the, "like new" appearance.
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
Super Member
Re: Paint protection....what is the best option?
1.) Ceramic/Glass coating. Ease of maintenance, looks, durability, protection, etc. With proper maintenance, it does it all very well for quite some time. Longevity: 1-3 years realistically.
2.) Synthetic sealant. These will have some of the above characteristics, but will not last as long. Longevity: 4-10 months.
3.) Wax. Again, similar properties as above, however your longevity nose dives at around a 2-3 month maximum.
The above is for a well maintained vehicle that sees average use and is not abused.
If you want to delve into a coating, there are some consumer coatings that are very good and would serve you quite well for approximately 1 year +/-. Do some research, watch some videos and let us know what you decide to do!
Scott Harle
Autodermatology
#autodermatology
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Regular Member
Re: Paint protection....what is the best option?
Coating. Done it recently. Used CQUK 3.0 and McKee's. Both have their own learning curve but after a panel or two, you'll be able to pick it up similar to either wax or sealant.
Costly at first but as people have mentioned it pays off in the long run as your car will look glass like for a long time!
Sent from my Mi A1 using Tapatalk
-
Re: Paint protection....what is the best option?
is this a daily driver? Do you hand wash, or run through commercial car washes? I couldn't recommend a coating for someone that frequents automatic washes.
I'm testing durability of some sealants in touch free car washes right now and jescar powerlock is a strong contender. Its so easy to put on and take off, is sunlight friendly, and doesn't stain trim. I can't find anything wrong with it. It's about to be my go-to.
-
Re: Paint protection....what is the best option?
Oh, by the way, here's a great thread on sealant longevity.
Sealant comparison
He hasn't tested powerlock yet though.
-
Re: Paint protection....what is the best option?
I am in the same boat. Sizzle Chest has listed the possible options 1) coating 2) Sealant 3) Wax. I notice that due to advances in chemistry, a lot of the category have become more mixed. You may have product that sort of cross between sealant and wax, etc.
In my humble opinion, wax melts in the heat, so would probably have a shorter life in high heat areas like Phoenix, this would be less of an issue in Exton, which is up North. Sealant in my opinion are probably a better bet.
I have watched some video on youtube on comparsion. Search for "sealant comparsion". I am thinking of using a sealant "Jescar Power Lock". Reviews talked about its durability.
Paul
-
Super Member
Re: Paint protection....what is the best option?
Originally Posted by jserr68594
I am not one to wax every couple
of months, but am not opposed to
doing something say once a year.
Keeping the spirit of your above
sentiments in mind...I feel compelled
to suggest the following Sealant:
Finish Kare 1000P Hi-Temp Paste Wax
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Paint protection....what is the best option?
Based on your post, I would COAT it BY YOURSELF. For $1,000 you could by all the necessary equipment and a decent consumer grade coating. My assumption is that your F150 will not be garaged and therefore out in the elements. Gyeon, Gtech, Polish Angel, McKee's and many well known brands have a consumer type coating that you could apply.
As for my ride, I use a sealant topped with a wax. My front and rear bumpers are coated. So I use all 3 methods of LSP. But my ride is a Garage Queen which is why I have a sealant topped with a wax or just a sealant or wax alone. The bumpers are made of plastic and are more porous and are more prone to get harmful elements that may affect your paint. Additionally, I enjoy detailing my ride so I came up with this compromise.
But again, If I had your situation, I would coat it. But YOU SHOULD COAT IT, not paying someone to do it.
Applying a coating is very easy. The difference (at least my 1st hand experience) is have PLENTY OF LIGHT and take your time. The weakness of a coating is streaks and high spots if you are not careful.
Getting to the LSP is the same process of a compound/polish and decontaminate process.
CJ
2013 Mustang GT w/Track Pack 6-Speed Manual
Save the Manual!
Similar Threads
-
By emmjay in forum Off-Topic
Replies: 4
Last Post: 07-19-2016, 12:50 PM
-
By jarred767 in forum How to make money detailing cars
Replies: 18
Last Post: 03-09-2015, 09:38 AM
-
By 11Frontier in forum Auto Detailing 101
Replies: 4
Last Post: 01-27-2015, 08:26 PM
-
By empty-c in forum Ask your detailing questions!
Replies: 11
Last Post: 08-05-2011, 10:22 PM
-
By cbsb in forum Auto Detailing 101
Replies: 1
Last Post: 03-14-2011, 10:52 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks