-
Re: Anyone else ditches the 2 bucket method?
Originally Posted by
MikeC78
If you don't use the same mitt, then where are you pulling them from? The dry shelf? No thanks! I'd rather keep mine soaked in a bucket of soap. That guy is too dramatic for me in that video.
Yeah you're right. I guess I'm also trying top find an excuse for buying a foam gun. Hahaha
-
Re: Anyone else ditches the 2 bucket method?
Look up the Gary Dean method. Yes. I fill a bucket with mitts/towels and fill it up with a soapy solution. Same if I was doing rinseless wash. I pull out a clean soap soaked mitt and wash a panel. Dump the mitt in the second bucket of water and pull a clean mitt from the first for my next panel. But yes, I keep the panel I'm washing wet or sprayed with rinse-less solution while I wash.
-
Re: Anyone else ditches the 2 bucket method?
Nothing wrong with a foam gun. I use them initially as a pre-soak sometimes when I have a filthy vehicle.
-
Super Member
Re: Anyone else ditches the 2 bucket method?
Whenever I do a traditional wash, I just use a single bucket.
I admittedly have a grit guard at the bottom, but only because I’ve had it for years and years. I think my friend may have given it to me if I’m not mistaken.
I will either use a garry dean method with towels, or I’ll use my boars hair brush. I’m aware of the taboo nature of even saying that I use a brush but I promise you, I have never noticed any scratching from my brush. When properly maintained I think it’s been one of my best investments for detailing (I’ve had mine since 2007/8 I think.)
My rationale for not bothering with a rinse bucket is that; if I was able to agitate the dirt off the surface without scratching, whatever I *might* have a chance of picking up when I go back in for more suds should be a non issue.
I do plan on getting some mitts though so I can try out using those vs towels or my brush.
Sent from my iPhone using Tapatalk
-
Re: Anyone else ditches the 2 bucket method?
No buckets. I use a rinseless wash mitt that releases dirt easily and a pressure washer with the machine gun grip with no lance, and a #40 tip. I keep a small squeeze bottle of car soap in my shirt pocket. I squeeze the soap into the mitt, blast it and the car with the pressure washer, and continuously rinse the mitt and car and add soap as needed. If I ever dropped the mitt, I would simply grab a fresh one and keep going. If I'm not using the pressure washer, then I do the same thing with a foam gun attached to the hose. The mitt rinses a lot cleaner being blasted by the pressure washer than it does being dipped in a rinse bucket.
-
Super Member
Re: Anyone else ditches the 2 bucket method?
I've been washing with a foam gun and multiple mitts long before the Gary Dean Method. I learned to wash from Accumulator; who has the best wash technique I've ever read about.
Treat it like it's the only one in the world.
-
Re: Anyone else ditches the 2 bucket method?
Originally Posted by
TheMidnightNarwhal
Yeah sorry the video is long but the point that came to mind is why use buckets if you have a foam cannon or gun right? You can always get clear dirt free water and soap from it as you go.
No you can get foam u can't get water. Getting rid of the 2 bucket wash is no good and I have a foam cannon. That's like telling the church to get rid of the cross
-
Super Member
Re: Anyone else ditches the 2 bucket method?
I’ve never needed a rinse bucket to wash... All I need is 1 bucket full of mitts and an empty bucket to toss them into as I grab a fresh 1.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Re: Anyone else ditches the 2 bucket method?
Originally Posted by
Eldorado2k
I’ve never needed a rinse bucket to wash... All I need is 1 bucket full of mitts and an empty bucket to toss them into as I grab a fresh 1.
Isn't it more productive to just use 1 or 2 mitts and a rinse bucket? It only takes 30 seconds to fill a rinse bucket and then you won't have all those mitts to wring out and put through the washing machine.
-
Super Member
Re: Anyone else ditches the 2 bucket method?
Originally Posted by
fightnews
Isn't it more productive to just use 1 or 2 mitts and a rinse bucket? It only takes 30 seconds to fill a rinse bucket and then you won't have all those mitts to wring out and put through the washing machine.
No.
Reason being is if I were to only use 1-2 mitts I’d have to constantly waste time bending down and repeatedly dunk my arm into a bucket of water and closely inspect the mitt to ensure it’s clean enough to use again.
Not to mention, with all that extra time I’m wasting I’d also be giving more time for soap to possibly dry on the panels, which is never a good thing.
On the other hand: If I have multiple mitts, I can grab 1, go over a panel with 1 side, flip the mitt and go over the panel once again to ensure it’s 100% clean and toss it into my empty bucket and grab the next mitt and continue washing the next panel and so on... Never stopping, never wasting time, never having soap dry on the vehicle, and never getting distracted.
Rinse all the mitts with the hose nozzle [which does a better job at getting them clean] as soon as I’m done with the wash and put the lid on my bucket and proceed to rinsing the soap off the vehicle. IMO It doesn’t get any easier.
I don’t wring the mitts out. I usually just leave them in the clean soapy water with a lid over the bucket. Washing a load with several microfiber items is more productive than washing only 1-2 mitts per load.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
Bookmarks